- Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I installed it on my KATANA. I purchased the C Type because I modified the OilPressure part to install the Sensor.Read More - Fits:
- YAMAHA YZF-R3
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02 Oil temperature sensor (sensor mounting position/left side of drain bolt)
- YAMAHA XG250 TRICKER XG250 Oil temperature sensor (sensor location/left drain bolt of crankcase)
- YAMAHA CYGNUS X SR All years Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- ...and more.
Without it, Oil Temperature Meter is not available.I think it could be a little cheaper.Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
I didn't think of any other manufacturer because my previous car was also equipped with Mats Stripe.The OEM and durability of the W series are good, and I hesitated to replace it, but I thought that I...Read More - Fits:
- YAMAHA YZF-R3
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02 Oil temperature sensor (sensor mounting position/left side of drain bolt)
- YAMAHA XG250 TRICKER XG250 Oil temperature sensor (sensor location/left drain bolt of crankcase)
- YAMAHA CYGNUS X SR All years Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- ...and more.
YOSHIMURA's PRO-GRESS1 Temp/Bolt Meter and Quantity for 4mini's Oil Temperature Control:SetUse.It's been about 3 years now and it still works fine.Since the wiring is facing downward, I was worried th...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive.Read More - Fits:
- HONDA SHADOW750 98-04 VT750
- HONDA VT250 SPADA (MC20 1000012-)
- HONDA MAGNA(V-TWIN MAGNA) (MC29) VT250
- HONDA SHADOW125 VT125
- HONDA VTR1000FVTR1000F FIRESTORM (SC36)
- ...and more.
I still think OEM is the way to go.Read More - Fits:
- HONDA SHADOW750 98-04 VT750
- HONDA VT250 SPADA (MC20 1000012-)
- HONDA MAGNA(V-TWIN MAGNA) (MC29) VT250
- HONDA SHADOW125 VT125
- HONDA VTR1000FVTR1000F FIRESTORM (SC36)
- ...and more.
It's an old motorcycle so I replaced it before it failed. The work is easy, just remove the Cowl and replace with OEM. The bolt holes for installation are Exactly the same, so there is no need for mac...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It can be installed on B type 9R without any problem, but it is difficult to install without removing the Upper Cowl because the Spring that holds the Valve interferes with the Heat sink during instal...Read More - Fits:
- Others MAJESTY125 FI YAMAHA TAIWAN
- Others XL HLD
- Others Xciting KYM
- Others VRSCD HLD
- Others GRAND DINK KYM
- ...and more.
I had to replace the Headlight Bulb on my Motorcycle because it suddenly went out.It was a hassle to get to the Headlight Bulb on the CRF250M, but once you learn it, it's easy.After the replacement, i...Read More - Fits:
- SUZUKI SKYWAVE250 burgman 98-05 CJ43A Water Temperature Gauge [Engine left thermo housing] (*3)
- YAMAHA YZF-R1 98-01 [water temperature gauge] [position:replace STD sensor]
- SUZUKI SKYWAVE650 burgman 02 [Water temperature gauge] [Position:radiator hose (adapter required)
- SUZUKI BANDIT1250 07-08 [Water temperature gauge] [Position:radiator hose (adapter required)] (*2)
- SUZUKI BANDIT250 -94 (with cowl) [water temperature gauge] [position:replace STD sensor]
- ...and more.
[How is it used?YOSHIMURA Required for Meter.You have to buy it.If you wrap the seal tape around the TaperScrew and install it, it won't leak so much.Easy electrical connectionWas the one you received...Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
The OEM light valve of SEROW250 ran out of bulbs, so I installed it.I ran out after just under 60,000km, so I'm happy to replace it when it gets over 50,000km.Compared to the OEM, it's about three tim...Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I installed it on my NSR250.The OEM has a 2-pole coupler compared to Bullet Terminal, so it is installed with Rose Wiring.Confirm that the water temperature gauge is working after installation.We'll r...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It is written that it corresponds to H4 Valve, but it is inaccurate and it is not possible to install it without removing it to some extent with File, and it doesn't fit in the Headlight because it is...Read More - Fits:
- YAMAHA YZF-R1 RN24J [stock number]4HM-83980-00
- YAMAHA XJR400S 4HM [stock number]3FV-83980-00
- YAMAHA XJR400RII 4HM [stock number]3FV-83980-00
- YAMAHA XJR400R RH02J [stock number]4HM-83980-00
- YAMAHA XJR400R 4HM [stock number]3FV-83980-00
- ...and more.
It was broken before I knew it, so I replaced it. Normal Switch with nothing of note at all, thank goodness it's inexpensive, nothing to write 60 words on. Normal.Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
It is easy to install. it is highly recommended that the WaterproofTape is pre-wrapped. Couplet-on so anyone can use it!Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I bought Progress and I bought this one as well for water temperature procurement.I think all the sensors are the same, but the coupler may be different depending on the object, so I have arranged the...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I wanted a brighter headlight with the old VMAX, so I decided to use Multi-reflector and Large diameter head, but I wanted a brighter light with the current appearance and aimed for LED.I tentatively ...Read More - Fits:
- YAMAHA YZF-R1 RN24J [stock number]4HM-83980-00
- YAMAHA XJR400S 4HM [stock number]3FV-83980-00
- YAMAHA XJR400RII 4HM [stock number]3FV-83980-00
- YAMAHA XJR400R RH02J [stock number]4HM-83980-00
- YAMAHA XJR400R 4HM [stock number]3FV-83980-00
- ...and more.
After 20 years, the Brake switch has been extremely malfunctioning and seems to have reached its limits, a few years ago It was repaired in sections, but the contact point also deteriorated I gave up ...Read More - Fits:
- YAMAHA YZF-R3
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02 Oil temperature sensor (sensor mounting position/left side of drain bolt)
- YAMAHA XG250 TRICKER XG250 Oil temperature sensor (sensor location/left drain bolt of crankcase)
- YAMAHA CYGNUS X SR All years Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- ...and more.
i bought it at for MONKEYIt's nice and luxuriousThe wiring can't be removed, it's right out underneathI thought it would be nice if it was an inset PatternRead More - Fits:
- HONDA
- HONDA CB1300 Super Four 03-05
- HONDA CB400 SUPER BOL D'OR -06
- HONDA CB400 SUPER FOUR 04-05
- HONDA CBR1000RR 04-05
- ...and more.
I installed it on my CB400SB NC39 Isn't this the wrong tap diameter? There's no sign of the screwdriver!It's all four It was very frustrating though I managed to put on the Screw I can't get it to fit...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING