- Fits:
- SUZUKI SV650 S 16-18 [Used point]Front right side
- SUZUKI SV650 S 99-01 [Used point]Front right side
- SUZUKI SV650 16-18 [Used point]Front right side
- SUZUKI SV650 99-01 [Used point]Front right side
- SUZUKI V-STROM1000 02-08 [Used point]Front right side
- ...and more.
This was my first time purchasing and installing brake pads. The Red "AKA" Pad seems to be a good "moderate" choice. The price is average, and the quality seems high.
The pads I replaced were the fac...Read More - Fits:
- KAWASAKI W400 -08
- KAWASAKI W650 -08
- KAWASAKI W800 11 Not available for '21 models
The sidepanels arrived very quickly, 5days, after ordering then, excellent service. The panels are constructed relatively well but do require a bit of time and effort to fit due to the upper fittings ...Read More - Fits:
- KAWASAKI W800 CAFE 19
- KAWASAKI W800 STREET 19
- KAWASAKI W800 19-21
- KAWASAKI W650 99-08
- KAWASAKI W800 11-16
I ordered these engine bars for my Kawasaki w650 as the were mot to big and looked OK. I'm so glad I went with them as they were an easy fit and don't look out of place. I would recommend them.Read More - Fits:
- HONDA CBR600RR 03-04
- HONDA CBR600F Sports 01-03 (CBR600F4i)
- HONDA CBR600F 99-01
- HONDA CBR600F 95-98
- HONDA CBR600F 92-94
- ...and more.
DAYTONA's accessories are not the first time I have come into contact with either the short tail kit or the material used in the design of this car's clothing. The price is very careful and cost-effec...Read More - Fits:
- KAWASAKI ZXR250 89-99
- KAWASAKI ZXR250R 89-99
- KAWASAKI ZX-9R 98-03
- KAWASAKI ZRX110 97-00
- KAWASAKI ZX-6R 00-19
- ...and more.
The cover is very beautiful, high quality, and has fine craftsmanship!
Very smooth and fit.
But the price is a bit expensiveRead More - Fits:
- KAWASAKI W650 08 [EJ650A] [Frame No.]EJ650A-061001 and later
- KAWASAKI W800 14 [EJ800A] [Frame No.]EJ800A-018001 or later
- KAWASAKI W800 13 [EJ800A] [Frame No.]EJ800A-015001 or later
- KAWASAKI W800 12 [EJ800A] [Frame No.] EJ800A-008001 to 015000
- KAWASAKI W800 11 [EJ800A] [Frame No.] EJ800A-000001 to 004232
- ...and more.
I ordered one for my K3 that I just took delivery of because I was told that it could be installed on a W800.The plating quality is good, polished and very gorgeous.Installation was as easy as I expec...Read More - Fits:
- KAWASAKI VERSYS X 250 TOURER 17-21 (KLE250DHF)
- KAWASAKI VERSYS X 250 TOURER 17-21 KLE250 BHF/BJF/BJFA/BKF/BKFA/BLFA/BLFB/DHF/DJF/DJFA
- KAWASAKI VERSYS 650 15-20 (KLE650F)
- KAWASAKI Ninja650 12-21 EX650 ECF/EDS/EEF/EFF/EGF/KHF/KHFA/KJF/KJFA/MLF/MLFA/MMFAN
- KAWASAKI Ninja400 18-22 EX400 GJF/GJFA/GJFB/GKFA/GKFB/GLFA/GMFNN/GMFAN/GNFAN/GNFBN
- ...and more.
It is difficult to experience the performance of the Oil Filter, but we always buy this one because it is less expensive than the OEM.There have been no particular problems until now.Read More - Fits:
- KAWASAKI W800 19-21
- KAWASAKI W650 99-08
- KAWASAKI W800 11-16
- KAWASAKI W800 CAFE 19-20
- KAWASAKI W800 STREET 19-20
I installed it on my w800/2016. I don't know how functional it is until it falls over, but the design is great. I am glad I chose DAYTONA Pipe Engine Guard.Read More - Fits:
- KAWASAKI Z800 13-16
- KAWASAKI ZZ-R1200 02-05
- KAWASAKI GPZ600R 85
- KAWASAKI ER-6f 07-10
- KAWASAKI ER-6n 06-14
- ...and more.
SIZE 3L purchased400X with OEMRear Carrier (NC56) Attached toJust fit!Read More - Fits:
- KAWASAKI Z750 (water-cooled) 09 [ZR750] [Frame No.] ZR750L-058001 to 090000
- KAWASAKI VERSYS 650 13 KLE650
- KAWASAKI VERSYS 650 10 KLE650
- KAWASAKI VERSYS 650 11 KLE650
- KAWASAKI VERSYS 650 12 KLE650
- ...and more.
Super oil filter actually at this price (67927) is!1pc. costs 1100-1200 yen.The price is for six pieces, so it is very inexpensive.I hoarded it!There are 6 pieces in a box and no individual packaging....Read More - Fits:
- HONDA CBR600RR 03-04
- HONDA CBR600F Sports 01-03 (CBR600F4i)
- HONDA CBR600F 99-01
- HONDA CBR600F 95-98
- HONDA CBR600F 92-94
- ...and more.
It is used for REBEL 1100.Size is fine, texture is reasonable, no complaints.It will be easier to use if the front and rear can be distinguished with a quick glance.Also, the Heat Resistant Seal was d...Read More - Fits:
- YAMAHA MT03
- HONDA CB1300 SUPER FOUR SP 20 SC54-250
- HONDA Forza300
- HONDA CB1300 SUPER BOLDOL SP 20 SC54-250
- YAMAHA YZF1000 THUNDER ACE
- ...and more.
I bought this for my ZZr1400 with top case, but the size is too small to use.There is no room at all in the Large size of the Cover.Read More - Fits:
- SUZUKI gsx1100s katana (sword) 81-00
- KAWASAKI Varios 2 91-07
- KAWASAKI barios 91-07
- KAWASAKI Ninja 250R 08-11
- KAWASAKI Ninja 250 13
- ...and more.
This product can be replaced with an OEM Product for a more upscale look! The aluminum collar can be used on large motorcycles without any discomfort.Read More - Fits:
- HONDA NSRMini 00-09 [Used point]Front
- HONDA NSR50 93-99 [Used in]Front
- HONDA NSR80 93-99 [Used in]Front
- HONDA APE100 TypeD 08 Frame No. HC13 [part used]Front
- HONDA CBX125Custom 93 [Where used] Front
- ...and more.
It is used for NSR50 and NS50F.If you are thinking of playing with Circuit on a Mini bike, etc., please use it.It stops well in circuit driving and is perfectly maneuverable.It is not that expensive, ...Read More - Fits:
- KAWASAKI Z800 13-16
- KAWASAKI ZZ-R1200 02-05
- KAWASAKI GPZ600R 85
- KAWASAKI ER-6f 07-10
- KAWASAKI ER-6n 06-14
- ...and more.
[How is it used?It is outdoors to the extent that it blows in a little.Was the one you received as per Image?I think it is as shown in the product photo.How was your experience with it?The rear tire i...Read More - Fits:
- HONDA CBR600RR 03-04
- HONDA CBR600F Sports 01-03 (CBR600F4i)
- HONDA CBR600F 99-01
- HONDA CBR600F 95-98
- HONDA CBR600F 92-94
- ...and more.
I bought this for my ZEPHYR750 and VTR-TypeLD. the size for VTR was perfect, but the size for ZEPHYR750 is too large for the specified size. I didn't know the model on the box, so I bought one size sm...Read More - Fits:
- HONDA CBR600RR 03-04
- HONDA CBR600F Sports 01-03 (CBR600F4i)
- HONDA CBR600F 99-01
- HONDA CBR600F 95-98
- HONDA CBR600F 92-94
- ...and more.
We have used them before and the price and texture are as expected.The Motorcycle Cover compatibility chart on DAYTONA's homepage lists Rebel as size 2L, but the size compatibility chart on the back o...Read More - Fits:
- HONDA NSRMini 00-09 [Used point]Front
- HONDA NSR50 93-99 [Used in]Front
- HONDA NSR80 93-99 [Used in]Front
- HONDA APE100 TypeD 08 Frame No. HC13 [part used]Front
- HONDA CBX125Custom 93 [Where used] Front
- ...and more.
I purchased this product to replace the Brake Pads on my W800.Since I drive a slightly older model W, I had a strong perception that Rear was Drum, so I bought it without looking carefully.I have to b...Read More - Fits:
- KAWASAKI W650 08 [EJ650A] [Frame No.]EJ650A-061001 and later
- KAWASAKI W800 14 [EJ800A] [Frame No.]EJ800A-018001 or later
- KAWASAKI W800 13 [EJ800A] [Frame No.]EJ800A-015001 or later
- KAWASAKI W800 12 [EJ800A] [Frame No.] EJ800A-008001 to 015000
- KAWASAKI W800 11 [EJ800A] [Frame No.] EJ800A-000001 to 004232
- ...and more.
chrome quality is very good and simple. Price is price so high uu
but
next time ill buy this item, look so usefull item for me Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING