? 
DAYTONA Oil Temperature Gauge with Deep Stick
It's good quality. made by stainless. Glittering solidity , anyway if you have about 40$ you can make bike more pretty. I satisfied with it.
-
| Displacement | 499 | Engine Type | 4-stroke/Air-cooled/SOHC/2 Valve |
| Maximum Output (ps) | 32ps(24kw)/6500rpm | Maximum Torque (kgf/m) | 3.7kg・m(36N・m)/5500rpm |
| Vehicle Weight (Dry Weight) | 153 | Fuel Tank Capacity liter | 12 |
GARAGE T＆F Exclusive Gasket for Intake Manifold
It is cheaper than OEM, it is not a place that you can see from the nature of Gasket but the quality is also satisfactory. It is appreciated to arrive the next day.I would like to purchase again.
![IRC TR-011 TOURIST [4.00-18 64P TL] Tire](http://img-webike-370429.c.cdn77.org/catalogue/11547/301554_TS.jpg)
IRC TR-011 TOURIST [4.00-18 64P TL] Tire
I am wearing it together with Front.I heard that rumors are good, but it is a perfect tire for forest road TrekkingIn order to make it wear on SEROW 225, since there is a thickness of Tire from general OffTire, it isI have to slide the Slider a bit to avoid interference.So please note that you may h...
HURRICANE European 1-type Φ7/8-inch Handlebar...
Installed in ZrX1200DAEG. Cable classes are all NORMAL, I think that it is the Handlebar of the height which can be mounted with probably Normal cable length. Accelerator Wire and SwitchHarness are a little affordable, but Brake hose can not afford until Stem's Clamp is removed. I changed severa...
KIJIMA Knee Grip Pad
the product is made of good quality rubber. ship ment was very fast. . . . . ..
.
.
....
.
.
....
NGK Power Cable (Plug Code)
If the Plug is a consumable item, even a Cable consumable. Planned for replacement at plug replacement. If you replace it with Dress-up to make it Red, because it's Sale.
DAYTONA Bolt-on LUCAS Tail Lamp Kit
OEM's Tail lamp corroded and replaced. Installation itself is easy, but it is individual differences or processing was necessary. Although the appearance is no problem, the finish of the invisible place felt sloppy.
KIJIMA Front Fork Boots
I installed it on the Yamaha XG 250 TRICKER.It can be mounted without problems, both Front fork's Inner and Outer are Size patchy.But, is it a little bit Bellows in the Slim car body?
PMC(Performance Motorcycle Creative) Stem Taper Be...
It purchased for MAJESTY 125 fi, it was 5866 yen because I bought it before SummerSale. There is no trouble at the moment after installation.
GOODS Pipe Light Bracket
Easy to install, fits well on a Yamaha SR400, can be mounted in 2 ways (long brackets above or underneath) so you can position the headlight low or high depending on the position of your speedo.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING