82 Reviews View type:
[How is it used?The Heat Shrink Tube I had on hand went somewhere, so I bought one.I chose this product because it is a sizeφ3.2mm, which is often used in Wiring, has a length of 3m, and is relatively...Read More- When tinkering with the electrical components on the Self, one of the things that tends to get ugly is the insulation on the terminals that are used naked, such as the Bullet Terminal.I think it's mor...Read More
- I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.I didn't want to modify the OEM body side harness, so I used this Coupler.I must have had plenty of Model 110...Read More
- I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.I didn't want to modify the OEM body side harness, so I used this Coupler.I don't usually use anything other ...Read More
- Fits:
- YAMAHA YZF-R1 07 etc.
I used it with License Plate LightWiring.For WR, the Brown wire on the body side was Plus and the Black wire was Minus.I used it in connection with Y's Gear's Fender Eliminator Kit.It can be connected...Read More - I have posted before (https://imp.webike.net/article/0419666/) about the product that is the subject of the impregnation, but when I posted the impregnation Type of vehicle used (installed) column now...Read More
- Fits:
- YAMAHA YZF-R1 07 etc.
Blinker connector for turn signals from Daytona. I bought myself on YAMAHA YZF R1 RN12 05. Because I have a motorcycle of the American version, there is a turn signal connector for three contacts. I...Read More - Fits:
- KAWASAKI Universal
I bought myself a used Kawasaki motorcycle. After the purchase, after some time, the rear turn signal stopped working. After diagnostics, it turned out that the old owner tore off the connector on t...Read More - [How is it used?I purchased the product because I had plans to modify the Harness on my vehicle.Harness tape would be nice, but it tends to unravel over time and looks bad, so I like to refreshing it ...Read More
- I purchased this product for my new car. Because it is possible to charge easily only by the Coupler connection if this is put on, it is convenient for the battery performance maintenance and manageme...Read More
- Some OEMs use this shape of Connector, butThis time I used it as an intermediate Connection Connector for 2-pole to retrofit the Automatic shifter.I think it's a standard product, so it's hard to make...Read More
- Fits:
- KAWASAKI Universal
This one didn't fit the size feeling either, so I gave up using it.Color for sale at After:Gray's Coupler is a bit of a rarity.The quality is not a problem at all, and I would recommend this product t...Read More - Fits:
- KAWASAKI Universal
I bought it as a Universal Product, not as a BlinkerConnector.It's a little disappointing that it's still bigger than it looks in the picture.However, I don't think there is no problem here to use it ...Read More - Blinker was used to make Wiring around the Front of WR250X. I changed to this preventive coupler for safety reasons.The point that the Coupler's insertion and removal of the Coupler itself is Large st...Read More
- It was used at the time of Number Plate conversion & rarr;Fog Lamp of WR250X. Around the Headlight & along with Number Plate conversion, Wiring is further rain and wind. It's safer to go Waterproof be...Read More
- What made you decide to buy?Coupler for option and sub harness coupler-required for connecting onHow was your experience with it?Coupler for 400X Option and Sub harness (https://imp. webike.net/articl...Read More
- Fits:
- YAMAHA TW200E
- YAMAHA TW225E
The same thing as that of the OEMOther Brand ProductIt's useful for attaching tail lamps and other productsRequires separate Crimp Tool from ConnectorCrimpIn the past, the OEM body side Connector was ...Read More - Fits:
- YAMAHA TW225E
- YAMAHA TW200E
What made you decide to buy?I thought I needed it to connect to the ETC couplerHow was your experience with it?ETC and USB/Cigar socket power supply (https://www.webike. net/sd/21440311/) for ETC and ...Read More - What made you decide to buy?I thought it was necessary to connect to the coupler for the option couplerHow was your experience with it?Fog Lamp (https://imp.webike.net/diary/) 0125602/) for Option in ...Read More
- Fits:
- YAMAHA YZF-R1 07 etc.
The DAYTONA Connectors are useful for DIY processingThis is also used to replace the MT-07's Blinker with an LED oneIt's also important to be able to return to the original state, and most importantly...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING