KIJIMA Hose L Type
Within six months of installation, cracks appeared throughout the Hose.I didn't try to force it around or apply solvents.I immediately stopped using it and replaced it with KITACO's SUPERFuel hose.The...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
KIJIMA Reflector S
The edge of the reflector was not 100% perfect upon close inspection, it seemed to come with some minor scuffs/scratches but it's otherwise a suitable replacement for a JDM Stret Magic TR50. An adhesi...
KIJIMA Change Rubber
[How is it used?I replaced the OEM Rubber on the Change Pedal, the cushioning is better and the change is easier.Was the installation difficult?I'm using it through an 8mm Bolt so it was easy to just ...
KIJIMA Change Rubber
[How is it used?I use it in place of the Cushion in my homemade BrakeExtension bar.Was the installation difficult?I'm using it through an 8mm Bolt so it was easy to just thread it through the Bolt.How...
KIJIMA Radiator Guard
I bought this product because I felt confident that it was made by KIJIMA, but I could not install it at all because of the defective dimensions. It is a pity. I returned it.Is it really for MD47?
KIJIMA Classic Grip
I used it on my Kawasaki Z1. The atmosphere changes just by installing it.If you want to use glue, you can use it without ExactlyGap, but please be sure to fix it with glue. You can use it without glu...
KIJIMA Heat Resistant Rubber For Exhaust Silencer
[How is it used?I used it to fix the external Silencer on my TZr50R.KIJIMA's Silencer band70?Size (https://www.webike.net/sd/20522931/) It is used by wrapping it around the inside of theHow was your e...
KIJIMA Aluminum Exhaust Band
[How is it used?I used it to fix the external Silencer on my TZr50R.Silencer is 60mm, but I bought 70mm and Band because I saw that there is a gap at the Bolt fixing point when I put Elastic band.Was ...
KIJIMA Oil Filter
I think it is difficult to evaluate the performance and efficacy of ☆Filter.☆ Because it depends on the performance of the OIL to be replaced and its frequency.☆ But with Magnet is available at Reason...
KIJIMA Plug Pin Set
I use it to hold the Earth of the electronics firmly in place through the Bolt on the car body.The Stag beetle type would have been fine, but it would have fallen off while removing the Bolt. This per...
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
KIJIMA Key Holder CNC Type
I bought this to make a special key for my NC750X Luggage space.I had a duplicate key made and installed it here.Because the New ModelWave key of Honda seems to have thickness, it did not go in as it ...
KIJIMA Saddlebag Support
Essential parts for installing Saddle Bag on SR400 which has no load capacity.Quality is so-so but Cost performance is perfect
KIJIMA Bag Support Left Side
Of course, it was perfect and easy to get into. I think the quality of the product is also good.
KIJIMA Key Holder CNC Type
[How is it used?I have Restore Green color SEROW and I use it with Spare key.Was the one you received as per Image?I ordered this product after checking the design and color of the product at a local ...
KIJIMA Key Holder CNC Type
[How is it used?I use this product by installing it on Spare key of DJEBEL250 XC which I have been using for many years.Was the one you received as per Image?I ordered this product after checking the ...
KIJIMA Saddlebag Slide Rail
This is a mounting bar for Side Back of Eliminator.Quantity:Pair (for Left and Right) Necessary to install a stand-alone Tank Bag.It is a simple, good-looking, easy-to-install product that can be slid...
KIJIMA Flat Type Fuse 1A
Flat Type Fuse1A is a Single Body, and it is almost impossible to see it in the store, so I am very grateful for the Large change.It is the best current capacity for the place of the small current whi...
KIJIMA Bag Support Left Side
I bought this to install the Waterproof Side Bag on my CROSS CUB50.Just bolt it to the body of the car in two places.On the front side, remove and install the OEM Washer and the fixed nut that holds t...
KIJIMA Handlebar Mount Bracket
[How is it used?It is used on the top of the FrontMeter.Was the installation difficult?It is easy to install if you follow the Instruction Manual.How was your experience with it?When you clamp a heavy...
KIJIMA Fuse 7.5A
Motorcycles have added vibrations that cannot be expected in a car.If you use a cheap Flat Type Fuse, the Fuse part (core wire) may slip down and be exposed by vibration.In this regard, I have not not...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
KIJIMA Air Suspension Gauge
The front suspension of the FX is a semi-air suspension, but as the pressure drops, the ride quality deteriorates.I used to pressurize it with the for Motorcycle Inflator when it got low, but I strugg...
KIJIMA Spring Removing Tool
I purchased this to pull and install the OptionOEMCenter Stand Spring on my vehicle.It is one of the products that it is convenient when there is it though the appearance is few.
KIJIMA Graduated Cylinder
It's hard to see in the picture, but I noticed that when I close the Cap lightly, the air bubbles are released and I can use it for various measurements.It is only a weighing instrument for liquid.It ...
KIJIMA Oil Filter Wrench
Required to replace the Oil Filter on the FXDL1450.The notch avoids the CrankPositionSensor.It may not be impossible to remove it with the regular Filter wrench, but it is very useful.
KIJIMA Exhaust Insulation
The stainless steel wire is included and can be wrapped tightly around the exhaust pipe. The stainless steel wire is included and can be wrapped tightly to prevent the motorcycle cover from melting.
KIJIMA Econo Kit Automotive Tool Set
It can be relieved with all the tools that are useful at the time of an unexpected vehicle trouble when carrying it for the time to say in an emergency. It is easy to store in a narrow place because i...
KIJIMA One Way Valve Diaphragm Type
Stable throttle response with sufficient air intake 。 I used this product as a regulating valve for intake air pressure 。 It is in front of Air cleaner.
KIJIMA Hose Power Band 11mm
I used it on a Fuel Hose with an inner diameter of 6mm× outer diameter of 11mm, but the leak did not stop.
 |  |  |
| | | |
KIJIMA Helmet Lock
I was going to mount it on the Side frame of the Left Side of the vehicle, but when I put the Helmet on, it would touch the Chain and the Helmet would get dirty, so I mounted it on the Handlebar.Insta...
KIJIMA Helmet Lock
I installed it on my DL1000 V-STROM1000XT.This motorcycle is not equipped with a helmet lock, so you don't have to worry about where to put your helmet when you're out touring.The mounting position is...
KIJIMA Helmet Lock
Basically, the helmet lock of kawasaki Z125PRO has a hook at the place where the seat is removed and you can hook the D ring of the helmet. But I was worried about the side of Helmet hitting the footp...
KIJIMA Helmet Lock
I used it in my previous Motorcycle (CBR400R).It is a little difficult to hang, but I am satisfied.
KIJIMA Helmet Lock
I put this on my Touring Main to prevent theft.I bought this product thinking it would be good quality and downward facing, easy to install.It is a good product with one key and easy to use.How to use...
KIJIMA Helmet Lock
It is difficult to hang D Ring of MicroRatchet of SHOEI Full face though I installed it.It was scratched by dropping Helmet and failing to hang on the nail once.Since then I have been using Helmet Loc...
KIJIMA Helmet Lock
[How is it used?Used as Helmet Lock Holder.Was the one you received as per Image?It was as Image as a diversion assumption.How was your experience with it?KIJIMA has a special product for SV650ABS, bu...
KIJIMA Helmet Lock
The GSX1300R HAYABUSA has a helmet holder under the second seat, but to be frank, it's useless. It's easy to install and it's well made. I regret that I didn't get it sooner. The only thing I don't li...
KIJIMA Hell Lock Wire
I bought this because it is difficult to put on Helmet lock due to the shape of Helmet.It was easy to put it on through the Wire, and I was happy to be able to fix two of them.
KIJIMA Hell Lock Wire
I bought this wire because my vehicle does not have a helmet lock and I wanted to use the Seat lock to secure my helmet.The Wire is thin so it is easy to use. I am afraid that it may be cut to leave i...
 | | |
| | | |
 |  | |
| | | |
| | ||
| |
KIJIMA Classic Tool Bag
슈퍼커브 C125에 달기위해 툴백을 주문했읍니다.
우선 가죽두께며 질감이 좋았구, 가격은 비싼듯 하지만
값어치는 충분하다 생각됩니다....
KIJIMA Classic Tool Bag
It is installed on the JA45CROSS CUB, but it has been designed for Quantity:Pair (for Left and Right) I wish I had it inIt's solidly made and turned out a nice color when I applied Wax
KIJIMA Classic Tool Bag
I purchased one piece Kijima leather tool bag. Very nice and good quality product. Made of genuin leather.
My 0.5 liter reserve cannister is fit.
Thank you very much Webike staff.
KIJIMA Classic Tool Bag
Very nice finishing . Suitable for mini bike like kawasaki ksr110 or honda monkey .my mini cafe racer project finally done , thanks for the great product , I like it so much . Keep it up KIJIMA.
KIJIMA Classic Tool Bag
If the Stay currently sold at a Home center something is used well, it will become a Side bag [ Just size / a MONKEY ]! If the Chain lock something is put into the Side bag, it will come on the loadin...
KIJIMA Classic Tool Bag
Texture is quite high at the product made from leather thick [ firm ].Although the price is carried out so so, it is the quality corresponding to it.An easy tool and Chain lock enter in respect of sto...
KIJIMA Classic Tool Bag
It considers, and although reliance is small, its Parenthesis is the best including it!
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING