YAMAHA

I saw the Side BackBracket for YZF-R7 on the market and bought it together with the bag to increase the load capacity since it looked like it could be installed on the R6 in terms of design.https://ww...

Installed on Tracer9GT.I managed to install it by myself, although it was troublesome because I had to remove almost all of the rear Cover of the car body to turn the Bolt.I am satisfied because it is...

[How is it used?TZr250RS (3XV9) (1993 MODEL) I purchased the Wiring Diagram to check the Wiring Diagram for Restore.Obviously, the basic parts must refer to the comprehensive version.Was the one you r...

전원 부정조작이나 기울임에 대한 경보는 작동하나, 진동에 대한 부분의 작동이 잘 안됩니다. 민감도를 최대로 설정하여도 진동에 대한부분의 개선이 필요하며, 그 이외의 기능은 매우 훌륭합니다. 예를들어 전원 on/off시의 간편함이나, 별도의 리모컨을 가지고 다니지 않아도 된다는 점
----------------------------------------...

Mounted on MT-07. It has a handle and can be carried.It can hold a full face, a rain suit, gloves, etc., so there is plenty of room for an overnight touring trip. It requires a special carrier, but I ...

About quality and texture: Great quality and perfect texture for grip
About the feeling of use: Grips perfectly to position
Products to buy together: N/A...

I was able to install it by myself, and I can't say enough about the hardness when screwing in the four Bolts.Unlike Other Brand Products, there is a sense of security, which is limited to OEMParts.

Easy to install, just follow the instruction manual. Special tools are required.Damper was scratched from the start. I am looking forward to Touring now!The color of the damper matches the XSR900.

WR250r, whose buttocks are sore anyway from touring on forest roadsI thought about Gel Zab, etc., but I felt that the fundamental solution was not to increase the sitting area, so I bought a High seat...

Purchased to protect the original Seat from rain and UV rays.The fit is the same as the OEM product, and can be worn effectively with no discomfort.The outer skin has a little more friction than the o...

좋아요^^
배송도 생각보다 빠르고 좋습니다
단,! 한국에서 XXL사이즈 입는데 3L사이즈는 조금 작은듯 합니다 XL정도?!...

I replaced the one from MotorHead.I'm 172cm 62kg and I feel a little bulky in L Size.I haven't driven in the rain yet, so the water repellency and durability are unknown, but I think it stands out wel...

이번에 처음으로 위바이크에서 야마하 매쉬자켓과 매쉬 글러브를 구매 했습니다.
야마하 바이크 출고 대기중이라 둘러보던중 종류도 많고 가격도 저렴해서 만족 스러웠습니다.
가장 좋았던 점은 빠르고 정확한 배송 서비스 였구요....

Lost one of your Gloves on the road? I bought it at the nearby YSP for a while, and the size is a normal M size with a Pitchy feeling It seemed a bit cramped (Size was only in stock in M.)The feel is ...

181cm, 76kg XXL fit.
It's little thin, so I think it will be good at late spring to early summer.
It has Protection pad but very thin. So If you want to buy this, please purchase more protection ge...

The OEM Clear shield was so badly scratched and visibility so poor that I went with the Blue shield while replacing it.I waited a month and a half for a BackOrder that was ready to be out of stock bec...

Helmet is HJC's IS33?One of the pins of the standard Pin Lock Shield was removed and the wind noise while riding was noisy, so I thought about buying the same Shield, but I learned from Impression tha...

I bought this for my 6 year old son who is 120cm tall. I bought this helmet because it has Inner Visor and is inexpensive. The Inner Visor can be lowered by sliding the Knob, which is easy to do, and ...

I bought this for my SEROW because the quality doesn't seem too bad.The Benchoolation function was fine and there was no distortion of vision.One complaint is that the bracket is not attached to the e...

Was the one you received as per Image?Yes, as per Image.[How did you feel about the Fit?"Replace worn out interior." Because it was, it is Fit feeling MaStripeSi.How was your experience with it?Natura...

Since it is an OEM, I don't think this is the best way to go about it.I don't know until I need to be concerned about OEMs.

Used for double-sided tape replacement of electrical components, etc.The adhesive strength is good and the quality is fine as it is made by 3M, which is a reliable company.

Uses 3M double-sided tape, which has an established reputation.In this temperature, it sticks strongly.Last week, I was using ButylTape.It didn't stick at all, so I tried again with 3M.I wasn't sure i...

YamahaOEMDial gaugeSTANDThe Large variation is useful for viewing the upper dead center of the piston.Until now, I had to extend the Dial gauge and insert it into the Plug hole, but with this STAND, I...

I bought this to remove the locker arm shaft from my SR400, but I didn't need to use the slide hammer. I didn't need to use the slide hammer. I just screwed it in and pulled lightly, and it came out e...