This 10 inches side stand is exclusively for Monkey & Gorilla. Beautiful side stand made of aluminum CNC. The overall length is approximately 275mm. The spring catch is a diverted bolt.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I was wondering if I should paint it or replace it with custom parts, but this product looked like it could be used, so I bought it at my own risk. I was wondering if I should paint it or replace it with custom parts.) It was almost the same length as the OEM one, but the KSR one was slightly angled at the base, and that was the part that bothered me. The KSR is located on the outside, so you will need to modify the screw so that it is on the front side. Also, although the screw size of the mounting part is the same, the Bolt of this product cannot be used (it can be used if the diameter is made smaller), so I used the KSR OEM as is. This product has a zagged surface, which interferes with the flange of KSROEM's bolt with flange, and the shaft of this product's screw is large, so the hole on the outside is between φ1 In order to use KSR's screw, you need M10 Washer or Spacer that can fit in the counterbore. If you want to use KSR's screw, you need M10 Washer or Spacer. I used a grinder to grind off a portion of the product so that the KSR Bolt flange would not interfere. I also adjusted the thickness of the Washer. When I raised the stand, the position of the end of the KSR would interfere with the Swing Arm, so I set the tap up so that it would hit the end a little closer to the end and adjusted the stop position with the bolt. That way, interference was avoided. Lastly, the lack of an angle makes the vehicle more upright when the STAND is applied compared to the OEM.
It took a little work, but I was able to install it successfully. Diversions are at your own risk. It looks great and I'm personally satisfied with it.View Detail
I diverted it to 51L with 3MA feet front and rear.
I have no problems at all with the fitment and can use the included Spring, although it is a little weak. You can also gain more clearance with the Chamber than with OEMSTAND, and you don't get hit by the Chamber anymore.
I think it depends on the setting of the undercarriage, but I park with care on the slope because it is a little too long impression and standing.
It may be too long to use on a body with NORMAL suspension.View Detail
important item [Was there anything that disappointed you? The use of this product is not compatible with the Material:It was easy to work with aluminum, and it was as expected
Do you have any wishes or improvements you would like to make for the Manufacturer? I think it would be easier to purchase a non-conforming product if information such as the diameter of the mounting bolts were included
[Do you have any products to compare it to? The company's steel Side Stand, which I was worried about because of the many variations in length
Frequently Asked Items What made you decide to buy? Material:Because it is made of aluminum, it is easy to process, light and looks good It was beautiful and the price felt right
How was your experience with it? The Bolt of the spring hook was moved to the other side of the spring hook because it is not applicable, or the ground surface was shaved We have done a number of things, including the following, but the Material:Aluminum was easy to work with
Was the installation difficult? I was able to use it on a car model that is not applicable with the above minor modifications
【Please tell me the installation point and hang】 Screw is provided to prevent the Large trapezoid bolt from loosening After the last tightening, the screw should be used to prevent the Large Clamp Bolt from loosening
[Was the Instruction Manual easy to understand? Easy to install for simple Parts, no need to look at the Instruction Manual It was
[Included Parts:were they on? Spring, Large Bolt, Screw, Spring hook Bolt It consists of
[Others] I was lucky enough to be able to use it even though it was not applicable The Side Stand is as light and beautiful as it looks, and I was able to install itView Detail
It is heavier than I thought, I think whether durability is a problem. I am very satisfied because the price is not high so far. I will also order again if I also buy next time.View Detail
[Webike Monitor] It purchased as an object for DAXs which exchanged the Rear suspension for the long thing. Although not attached, I still think that a Quality is high with considering a price.That is a little sorry for the portion of Spring receptacle to be Bolt appropriation.If the Spring washer etc. are not made to bite, it is the touch from which it is likely to loosen and escape.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!