Color: Black Position: 10mm up / 30mm back Stock top bridge simultaneous installation type [Kit Contents] ○Special Handlebar for the kit (Switch hole pre-processed) ○Handlebar bracket (with setback holder)
*The switch hole has been modified to match the stock one.Please be careful when you change the grip because Ninja1000 has shorter grip (115mm). *Side caps for handlebar inner diameter Φ14mm are required separately. *Images may contain other colorings and types.
[Handlebar kit] The handlebar kit is a product sold as a kit containing only the minimum parts necessary for replacement, and the handlebar has been processed with a switch specifically for the vehicle model. Handlebar bracket system for mounting on top of the stock top bridge Because the stock position is high, the height is not changed much, and it is set so that it may be a little forward at a natural aperture angle. Stock cables are bolted on.It can be installed within the range where no structural changes are required. ○Easy to install because there is no need to remove the main switch and top bridge. ○The amount of fork protrusion is reduced, so it can be installed neatly. ○The handlebar, whose switch hols is pre-processed, exclusive for duralumin kit can be bolted on.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I've been bothered by the vibration of the 2019 NINJA 1000's Handlebar and thought about switching But the vibration became considerably better when I replaced the Handlebar in a bad situation If you want to improve one thing, please make it easier to get the HandlebarCenter out I wonder?View Detail
No more Handlebar vibrations and easy to ride Curve and Long I'm so glad we made the change and I'm not tired of touring and I'm so glad we did. It only took about 60 minutes to install It was so easy to doView Detail
Previously I was wearing Over Handlebar Kit, The texture is perfect but it was not good for me, I attached this item this time this time.
For installation, remove OEMHandlebar Socket wrench and Allen Wrench Each Size can be removed.
Instruction Manual comes with installation, so if you install it accordingly, I think that if you can remove OEMHandlebar you can install it without much worry.
If you are familiar with it, installation is completed in 30 minutes to 1 hour. Also, I think that Grip can be installed to Smooth if you prepared a new item.
Since this Handlebar can not use OEMBar End, Attention is necessary because Bar End for Aluminum handle is required separately.
Since it was troublesome to fit to the handle center after attaching it, I thought that it would have been better if the Center had a mark.
As a result of making it into a bar handle, it became the allowable range of the handle which had become open in OEM, Since I was brought forward, I feel like Upright, It was just a good position for Touring.
Since it is a Bar handle, we add Clamp to Handlebar part and various Holder is attached so it is handy.
The disadvantage is that it overlaps Upper Bracket, Is it difficult to turn the key.View Detail
Although there is no large change of a Position, it mounts many things to a handle part, and is convenient for it.Although it was
attachment, in the Grip by the side of a Clutch, I bought an original manufacturer's product newly, and it used the Axel side as it was.The Axel side needs to remove a pure Bar end, when removing a Throttle tube, but since the Plus screw of this Bar end does not loosen easily very firmly, it is serious.Pushing a Driver so that a Screw may not be licked, I made the power turned on both sides of a Grip by an Adjustable wrench amplify, and removed somehow.In
and others, when putting a Bracket, unless it also loosens the Bolt which is binding tight the Fork by the side of a Top bridge, a Bracket does not enter.Even if a Bracket could not attach easily but struck by the Rubber hammer without noticing it at first, it was useless, but when having recongnized suddenly and loosening the Bolt of the Top bridge, it entered with Stone.If even the
Bracket can be attached, after letting an Axel pass for a Handle after that, a Handle is attached to a Clamp, the Grip by the side of a Switch box, a Clutch and a Brake, and a Clutch will be attached, a Bond will be inserted in, finally a Bar end will be attached, and it will be completion.Although it thinks that a Bar handle does not suit
SS, on this Motorcycle, I think that it matches well.View Detail
I ordered the Hurricane Handlebar kit and it arrived about 2 weeks later. The unit fit perfectly as expected. The handlebar was pre-drilled for all the components with locating studs such as the throttle assembly and such.The unit is first rate and looks like it is part of the original bike. I also ordered 2 inch (100mm)Rox Risers to further improve the riding position.Highly recommend this setup for those that want to improve the riding position further back about 100 mm.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!