Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
◆Plug-in diameter: IN side / Φ12mm, OUT side / Φ12mm ◆Thickness of the reed valve: 0.07mm
T-REV", which is achieved by the technology of the artisan, has a special structure which is different from the conventional pressure reducing valve. In order to increase the flow speed of blow-by gas discharged from breather by using the vortex in fluid mechanics and to discharge smoothly, "Spiral Line" is applied inside of T-REV, and furthermore, by making the reed valve surface into three surfaces, the force per surface is dispersed and the structure to discharge blow-by gas more smoothly. It has become the structure to discharge blow-by gas more smoothly.
Since T-REV uses the characteristic triangular pyramidal design reed valve, there is no malfunction of the reed valve due to excessive outside air from the air cleaner box and no restriction of the installation direction.
■What is T-REV? Currently, reciprocating engines are the mainstream of internal combustion engines for automobiles on the market. The reciprocating engine is the most basic internal combustion engine today, and the processes of "1. intake," "2. compression," "3. expansion (explosion)," and "4. exhaust" are converted into rotational motion through the crankshaft by the repetitive motion of the pistons in the engine.
In the engine, this work is being done at a blinding speed of several thousand revolutions per minute. The points of the crankcase pressure reducing valve (T-REV) are located in the case below the piston.
When the piston is pushed down at high pressure by expansion (explosion), some of the gas blows through the piston rings and flows into the crankcase.This kind of gas is called "blow-by gas", and the pressure in the crankcase is increased by this blow-by gas, and if the piston is lowered at this time, it becomes a strong force resistance.
This "pumping loss" is one of the engine brakes, but it also resists the piston motion of the engine.
This over-pressurized blow-by gas is discharged from the breather (a hole, pipe or hose to drain the blow-by gas), but the crankcase remains pressurized because the outside air is sucked in when the piston rises or the accelerator is turned off.
Therefore, by installing the crankcase pressure reducing valve "T-REV" in the breather path, it prevents the backflow of blow-by gas and outside air, and by optimizing the pressure in the crankcase (negative pressure), the original performance of the engine can be demonstrated and the same power can be obtained with less fuel.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I put it on the FTR in the NORMAL state and wondered if it changed that much That's the truth Is the emblems getting worse? And so on However, I think the problem was the bad state of the surroundings, including the state of the Engine Beginning with AICancellation, the Camshaft Chain Tensioner Adjustment, Plug replacement, air cleaner replacement with Other Brand Product, and I think this is a factor in the adoption of the Uotani SP2, which makes the dawn feel lighter I'm doing what I think I should be doing, though, which may be the right thing to doView Detail
Trial wearing party at a certain Motorcycle goods store
? 【How was it actually used?】
Wow, I was surprised.
If I changed to Slip-on Silencer I bought with a certain oku before installation, Throttle's Donzuki decreased, but the vibration increased and I was in trouble.
When I added the T-REV at the trial there, I felt the decrease of vibration before leaving the garage's parking lot.
Although the emblem certainly decreases, it is about the Level of familiarity, and how to apply Brake is slightly different.
When it went to the mountain more than that, Emble was weakened Downshift ceased to be fearful, it became possible to open Throttle with confidence.
Also, the rise of the engine's rotation became faster and smoother, and the engine's feeling of pulsation decreased accordingly, but I think that this person will be less tired to run a long distance.
? 【Was it difficult to install? (Hard parts case)】
Reference for installation on Manufacturer's website has been announced, so I imitated it.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
It's about time to put Hose's dimensions together in kind.
? [Is there anything I was disappointed about?]
None. Fuel consumption deteriorated forcibly. However, it is me that is bad - - - No ~ Throtrotle is fun to open it ♪
? [Request to Manufacturer - Please let me know if you have any improvement points]
Internal cleaning is encouraged once a year, but honest and troublesome. (I am doing it in the winter where I do not ride much.. )
? 【Have you compared items?】
I know that EARA and others have Manufacturer, but you do not have to compare if you actually experience things.
? [Others]
As the only weeping place - - - T-REV installation can not be seen from the outside at all.
I'm pasting Sticker as it can not be helped..View Detail
It is remarkable when decelerating by returning Throttle Emblem is Mild anyway! Just regular Maintenance is essential It seems that Oil emulsified on the Tube gets accumulated and it is pretty bad that I regularly put it out and clean it up. Taking it into consideration ☆ There are three ☆.View Detail
Timing well done at a certain Motorcycle shop in neighborhood because I was acclaimed by the person who installed the T - REV in a certain SNS community, so I was doing Events of free installation fee soon I got it installed.
I was thinking that this is Ha Gap, to be honest about whether the emblem was slightly alleviated on the ordinary road at home, but using Touring with a high speed after several weeks of installation Sometimes it showed power and I enjoyed a fun Touring. Overtake etc until installation. At the time of re-accelerating with the engine, there was such a bad feeling that the engine was trying to put up with an unreasonable load, but as soon as it was installed it became to accelerate to Smooth. I also thought that the emblem from the high-speed range was disgusted when I felt somewhat broken feeling, but this also Mild.
On normal roads it is impossible for me to feel that internal pressure will not rise. T - REV α seems better in order to be able to experience from the low revolution range. Unfortunately it seems that it does not correspond to my MT-09 yet so it was only possible to attach the unmarked one. Manufacturer is saying that it is under consideration, so if you are thinking of MT-09 as T-REV from now on, we recommend α.
However, those who frequently use high speeds and passages at Touring are buying. Especially engine like Engineering Makes a Mild Feeling with Peaky like MT-09, it turns into a Motorcycle that is easy to get on as a result. In the past, pass passages that would Knocking unless you frequently change your gears can also be fixed at 3rd speed.
Everything is not going to improve anything from anything, but I assure you that it is a part that shows absolutely Large effect in a specific scene such as a highway or a noisy pass road.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!