Color: Black / Red Shock length (bolt mounting center): 330mm Maximum diameter: 62mm Quantity: 2 pieces (for 1 vehicle)
*It may not be possible to install the product depending on the model year even if it is compatible model.Please check the size before you buy.
YSS 2012 Model HYBRID Gas Shock You will be satisfied with the ride comfort by strengthening the suspension. The inner diameter of the upper and lower collars is 10 mm.It also comes with a changeable collar to change to 12mm.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Since the ride height is often a problem when driving on the Circuit with the CUB, the I bought this for the purpose of raising the ride height, and the front is still NORMAL, so that is where the rating is. First of all, I set the Initial to the strongest to secure the bank angle, but the footpeg still contacts the road surface. It seems to be more of a driving style and bodywork issue than a suspension issue. The one I bought this time was 330, but I heard that there is a 350 on it, so I want to try it next time.View Detail
KN Planning Keiyunukikaku Rear Shock 330mm [HYBRID Series] caught my eye, so I bought it on impulse this time
It was a product I was curious about and purchased Honestly, I have no complaints about the quality/price of the product and it's working normally However, the product was not outstandingly good in any way
I bought the product and I don't feel like I'm losing money As far as shopping goes, I felt like it wasn't a loss
Quick response and a solid product Installation was not a problem as I've done it in the past I tried it out right away I'm fully convinced of the productView Detail
Mounted on the BENLY50CD90 Second Type Model, with an OEM shock replacement I considered it, but I bought it because of the price, which is about 1/3 of the OEM price
The upper collar is installed by replacing the supplied 12? To change the collar, use a thin slotted screwdriver between the bush and the collar Insert and fill the gaps with silicone oil or dishwashing liquid and place in the box of the same diameter as the collar You can easily pull it off by placing the wrench piece and hitting it with a plastic hammer When you put in a new color, you can use the opposite process
Harder than OEMShock, even with Spring's pre-road at its weakest (Rider (Weight 54kg) Same
But compared to the OEMShock (which has probably been unreplaceable for almost 20 years), the damping is better than the OEMShock Because of this, the impression of the ground feel has increased The feeling of lightness at the turnaround is also clearly improvedView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!