Bar End Mirror
Product # 1101288
1,111.87 PHP (2,990 JPY)
List price: 1,111.87 PHP Save 0%
+30 Webike point (11.15 PHP)
Product # 1101288
1,111.87 PHP (2,990 JPY)
List price: 1,111.87 PHP Save 0%
+30 Webike point (11.15 PHP)
About quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe.Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail
About quality and texture - Top quality. The surface finish from the CNC machining is so much better then the plastic OEM mirrors.About the feeling of use - They mount firmly to the handlebars with zero vibration even when idling the bigger 1200cc V-twin.Products to buy together - Some short CNC brake and clutch levers go together nicely with these mirrors.Difficulty of installation - Installation process is easy and can be accomplished with just an allen key but I did find that I needed to add a spacer on the throttle side to stop the mirror binding up on the throttle tube. Cost performance and comparison with other products - $32 AUD for a set of anodised CNC machined mirrors Just as good as the expensive ones and I'm not a fan of spending big dollars on mirrors as they are something I damage quite easily.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - These mirrors have a convex lens which can be strange to use initially but once you get use to them I find them much better then a standard flat mirror.View Detail
It's more than I expected
Visibility is good and there is little blur
I didn't particularly notice any blurring at all
It's good to have good visibility at a wide angle, but
It's too wide an angle and gives you a false sense of distance from the cars behind you
I thought he was pretty far back, and then I actually looked at him
On the other hand, I can be right behind you and giggle
Also, cars that are a little bit behind
It's a pea grain and is almost impossible to see
If only they'd cut back on the wide angle a bit more
It's a very good product and it's very disappointingView Detail
I bought it to make a Bar end mirror
I wasn't expecting much from the price
It's unexpectedly well done
It's a fairly wide angle Mirror
Small size, but with a fairly wide field of view
Support
In addition, the lack of blur was also in line with its previous reputation
As a product
I have no complaints at all
This is too wide of an angle
On the other hand, it's also a weakness
The nearest one
Because it's quite far away in the picture
The car I thought was behind me
In fact, a visual check
It's pretty close and scary
On the other hand, cars that are a bit farther away
It will be a pea grain on Mirror
View Detail
I feel that quality is good for price.
Because it is not compliant with vehicle inspection due to mirror area and other conditions, it is necessary to use it after being conscious.
That's because it's Small, so I like it myself...
There is little wonder and shake of the mirror surface due to vibration in the high rotation range.
Hexagonal Wrench is necessary for angle adjustment, so it will not be a bit of a fix with signal wait.
If you are not sure what to make it as a bar end mirror I think that it is easy to try in terms of price.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Please select option before add to your cart.
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.