Size: HX8mm Insertion Angle Size: 1/2(12.7mm) Socket Outer Dimensions: Diameter = 22mm, Length = 55mm Weight: 59g [Material] chrome-vanadium steel Surface Finish: Two layers of nickel chrome undercoat / matte chrome final finish [Specification] Laser marking [Standard] DIN (German Industrial Standards) / ISO (International Organization for Standardization)
*There may be changes in product specifications due to the manufacturer's reasons.
Hex Socket Bits
All items are laser marked with type and size The values of the altitude and the maximum torque exceed the DIN / ISO standard values, and the intersection of the dimension sizes is also within the standard.
Recently viewed products
Ratings & reviews for this product or related products
The Impact Driver from SIGNET, which I purchased recently, uses a thicker bit of 5/16in It's a good and sturdy thing in itself for its intended use, but the size difference between Plus and Minus is Bit is some Quantity:Although it is set, there was no Hexagonal bit (well (I thought I wouldn't use it until Torque) I've licked the Cap bolt on Hexagonal a few times before I thought that Hexagonal was indispensable However, because the Impact Driver is made sturdy after all, Socket is 1/2- it's a thick one with inches That's why I have a 1/4InchBit Adapter for the 3/8Inch socket I have It doesn't work (I have plenty of generic 1/4InchBits on hand.) So, not knowing anything about tools yet, I thought it was a 1/2Inch socket and 1/4 I thought there was an Adapter to fit the InchBit I thought that there is no Adapter to install InchBit I thought that I should look for the HexaGon bit of 5/16in It is So the only thing I could find was a 1/2Inch socketHead with Hexagonal directly on it It was the Socket bit of this PROXXON which is attached Being to become rather expensive, it does, but if this hits with Impact Driver, even if it hits with Impact Driver, Large sturdy seems to be strong It is so robust In my experience, the most likely to be licked is the M6-M10 Cap bolt, so it is 5,6,8mm I bought a Hex bit of PROXXON is a manufacturer in Germany, and the quality of these things is The laser marking is beautiful and the size can be identified at a glance Good, when you need to tighten it up with high torque, not just Impact Driver I'm going to use this for things likeView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!