Type: H7 Hi / Lo (Hi side only) Rated Voltage: DC12V Power consumption: 20W Color Temperature: 6000K
*Optional part (No.15201) is required to install this product on HONDA CBR600RR (PC37) ('05-'06). *This product is for Hi side only.
●When installed on the Hi beam side, the left and right lights can be switched on at the same time even when the low beam is on.
■By efficiently releasing the heat generated by the LED, the LED can always be lit at full power! LEDs are characterized by their extremely high conversion efficiency (the efficiency of converting input power into visible light [electromagnetic waves with wavelengths that can be seen by the human eye]), but even so, if the input power is 100%, more than 70% is converted into heat.The Cyclone LED series uses a combination of solid aluminum, a heat sink, and a waterproof cooling fan to efficiently dissipate heat and enable full power lighting at all times. Thermal management is essential for heat-sensitive LEDs.If this heat cannot be dissipated efficiently, the power must be reduced from the start of lighting or from the middle of lighting.In other words, if you don't have a good thermal management system, you can't get the full potential of LED.
■Adopts a highly durable waterproof fan! In the Cyclone LED series, Protec also paid attention to the fan which plays an important role in cooling the heat generated by the high power LED efficiently.The fan used for general electronic equipment is not suitable for motorcycles because the bearing of the rotating part is "metal support type" and durability is low.The Cyclone LED series uses a "dual axis ball bearing type" bearing with waterproof performance and excellent durability, which is also used for cooling fans of radiators.It may look small, but it has passed the 20G seismic test for 2 hours!Protech is the only LED bulb for motorcycles that uses a waterproof and durable fan.
■Long life! It has a longer life than H.I.D.
■Power-saving design! Power consumption is 30W for H4 / H4-R type and 20W for H7 type, so it is more energy saving than general H4 halogen bulb (12V 55 / 60W).
■Adoption of reliable CREE LED! Durable and reliable CREE XLamp XP-L LEDs are used for the light emitter.
■Hi / Lo switching! H4 / H4-R type has 3 LEDs for Hi beam and Lo beam respectively and Hi / Lo switching is available.
■Easy to install! It is easy to wire by replacing the valve coupler.
■Bright and quick lighting! Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I purchased 65010 which is exclusive for this product and Lo side for NINJA 2 Helmet 50 R. But it was a mistake.
First of all, if you were checking the contents of the product, the cooling fan's Wiring had run out. Of course I sent it back.
And as I tried to install it, there were various problems. First of all, I installed the valve Valve of the exchange at the position where the OEM's Valve was located, but ... I can not easily hold down the holders of holding down. The reason is that LED Bulb is thicker than OEM's Valve. I was forced to do it, but I was stopped when I pushed it with the force of half breakage.
Next, the cooling fan behind Valve and the dustproof Sponge can not fit nicely. Too bad.
The extremity is Harness. It does not correspond to NINJA 2 Helmet 50 R.
I brought back the goods, finally returned, I forced it, finally it was over. I think that this work is overkill now - obviously I do not agree with Large. Since it was troublesome to contact webike anymore, I directly contacted Protec. That said, Since this year, 65009 and 65010 are no longer compatible with NINJA 2 Helmet 50 R. I also told this to webike. That's right.. I got out of my body already. Webike Is not it too much? At the end of the phone, webike was told to tell him to remove the unmountable MODEL from the adaptation table. I called the phone in 2017. 4. It was 19. However, 2017. 4. 30 It is still on the current adaptation table. I do not know whether webike or Protec is bad, but I think we should fix it before a new victim comes out.
After all, it is troublesome to send it back so it is left as it is. It was supposed that I bought Garbage of about 40000 yen in Set. If it is true, come to my house to take responsibility and bring the thing adapted to NINJA 2 Helmet 50 R properly, I want you to install it, but it is impossible, so I give up. It is very unlucky.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!