Material: Steel [Size] Lock bar diameter (U-shaped part): 16mm (diameter is about 20mm including rubber coating) Internal width of lock bar (U-shape part): 128mm Internal height of lock bar (U-shaped part): 210mm Built-in alarm unit diameter: 34mm (Silicon cover is not included.) Built-in alarm unit width: 194mm (Silicon cover is not included.)
[Set components] ・Special tools ・Key ・CR2 lithium battery ・Back of the package / Instruction manual (English)
*Please check the tire size of your motorcycle. *There is a slight dimensional error in the size description.
This is a very strong U-shaped lock with a strong steel body and a strong key barrel. It can be tightly fixed to tires and wheels. The diameter of the lock bar is 16mm, which makes the lock stronger. Also, the internal width of the lock bar is large enough to accommodate larger tires. Of course, it can be used not only for motorcycles but also for bicycles. When vibration is detected, a piercing alarm sounding at a loud volume of 120dB is emitted, and this product is effective in preventing theft of your vehicle. In addition to waterproof specifications, the body of the disc lock is finished with a special surface treatment to give it a high-class look. The battery for alarm is CR2 lithium battery.(It can be used for approx. 10 months) In addition, the alarm has an [ON / OFF] function.
--- Operation --- [How to switch ON / OFF] When the key is turned (approx. 270°) to lock and then turned back, a short "beep" sound will be heard once, followed a few seconds later by a notification sound indicating that the security alarm has entered the ON mode. By repeating the same operation quickly again after turning on the device, you will hear a short "beep" sound twice.In this case, the security alarm is turned off. *When you lock the key, please confirm the sound of operation and lock the door.
[How to install the battery] *A Phillips screwdriver is required in addition to the supplied tools.Please be prepared. 1. Remove the lock bar. 2. Insert a Phillips screwdriver into the hole of the lock bar and remove the screw. *Remove the screw from the side without the key cylinder. 3. Remove the silicone cover, cover, and alarm unit in that order. 4. Remove the two screws from the alarm unit with the supplied tool. 5. Remove the battery cover and waterproof cover and install the battery. 6. Assemble in reverse order to complete. *Please be careful not to forget to attach the waterproof cover when you install the battery. *When installing the alarm unit, be careful to insert it into the notch on the alarm unit.
Recently viewed products
Ratings & reviews for this product or related products
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!