Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
*The brake hose and cables do not need to be replaced.The stock handlebar ends will not work.
* The image is only for reference. The image shown may differ from the actual product.
Easy Fit Bar is a bolt-on design.Easy to install. Unlike the EZ-FIT, which is based on the stock model and the handlebar position has been shifted parallel, the width of the handlebar and the aperture angle have been changed to create a more comfortable riding position. It is easy to install because it is designed within the range of stock hoses and wires. Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position. The width is about 30mm shorter than the standard, and the aperture angle is 2 degrees back.The height and the pull are the same as stock.End part inner diameter 14mm.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
[How is it used? It is for Xsr900, but I diverted it to xs700.
Was the one you received as per Image? Even in the form of Image Street.
Was the installation difficult? Since the wire was diverted from another company's car, a new hole was drilled to change the wire routing.
How was your experience with it? It's nice to be low, but The overall width has been shortened by almost 40mm, which feels strange.
[Included Parts:were they on? Handlebar only.
[Was there anything that disappointed you? I would like more width.
Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
I installed it on my XSR900 and the opening of the OEMHandlebar is the same as my It didn't fit the Position and I was suffering from wrist fatigue right after I started riding I bought this product because it was said that this product has two degrees of aperture than OEM Handlebar I did The result is a straightforward positionView Detail
NORMAL 's Handlebar is too wide and not favorite, and it is motivation for purchase to be a vehicle type Exclusive Handlebar. The actual size is several centimeters, the Grip position is on the inside, and the front is coming, but the appearance is a level that I do not know unless I say it. Because of the same height, subjectively, I do not feel the big difference between Large. It's saved because there is a Memory from Center in HandlebarCenter. Replacement procedure from PLOT to You Tube Since the movie is released, it will be helpful. Grip If you want to change the position and diaphragm, the price is not so expensive, so it may be worth replacing.
? 【What made you decide the purchase?】 The original Handlebar width was not suitable for me, so after riding the stiffness around the shoulder blades was terrible.
? 【How was it actually used?】 As Size is almost unchanged, the ride of XSR 900 does not change greatly, because the inclination was narrowed, it became easy without stretching your shoulders.
? 【Was it difficult to install? (Hard parts case)】 It was easy and comparable as it was just removing the main Bolt.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Removal of Bar End and Grip is hard so be careful.
? [Is there anything I was disappointed about?] It's Aluminum Handlebar so I turned on Bar Weight. Still there is a little vibration at high speed, although it is within the practical range.
? 【Have you compared items?】 HURRICANE's FATSwallow handle View Detail
NORMAL's Handlebar is wide and extra power comes in the arms and it gets tired.. After exchanging, because the place where the arm naturally extended became the Grip position, unnecessary power does not enter and it became very easy. Installation was also easy for Processed Switch Hole. Recommended for those riding in the same car.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!