Made in the USA: yes Model: DynoJet Quickshifter Packing: each Specific Applications: no Style: linear push Type: quick shift
*The instruction manual is in English. *We do not accept any after-sales service or inquiry for setting and installation method. *Delivery may be delayed due to importing. *For the shift rod / pressure / tension sensor, push the shift lever in the upshift direction and check if the rod is pushing or pulling the clevis on the shift shaft.If you have a linear travel sensor, move the shifter to upshift.If down, pull sensor is required.Up requires a push sensor. *Quickshifters require the shift rod to be replaced in certain models.Please make sure that your bike is included in the compatible model information of each shift rod.If included, the shift rod will need to be replaced in that bike.
* The image is only for reference. The image shown may differ from the actual product.
・Races are won or lost in fractions of a second; Dynojet's Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications ・The shift rod pressure / tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration ・Requires modification of gear-linkage tie-rod ・The linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit ・Mount one end to the shift lever and the other to a fixed point on the chassis ・Push or pull-types available with universal mounting kit ・Plugs directly into the Power Commander expansion port with no re-wiring required ・Power Commander Control Center software lets you set engine dead time during upshifts and minimum rpm for system operation
[Translation] ・Dynojet's Quick Shifter (DQS) kit allows for clutchless upshifts for full throttle, racing and performance riding ・The Shift Rod Pressure / Tension Sensor Kit is a universal sensor that attaches to the shift rod in either a push or pull configuration ・Gear connecting tie rods need to be changed ・The linear travel sensor kit will work on motorcycles without a shift rod, or on motorcycles for which a shift rod sensor is not compatible ・Attach one end to the shift lever and the other end to the fixing point of the chassis ・Push or pull type available with universal mounting kit ・Plugs directly into the Power Commander expansion port with no rewiring required. ・The Power Commander Control Center software allows you to set the engine dead time and the minimum rpm for system operation during upshifts
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!