Color: 6000K (White) Power consumption: 20W (High) / 15W (Low) Operating voltage: Both DC and AC Lumen: 2600 lumens (High) / 2000 lumens (Low) Product Life: 50000 hours 1 year from the date of purchase
[Set components] ・LED Bulb x 1 ・Controller x 1 ・Gibboshi x 3 ・Binding bands x 2 ・Double-sided tape x 1 ・User's Manual (Warranty)
*Please refer to the "Fitting List by Model" for compatibility information. *Modification or separate parts may be required depending on the model.Please check the compatibility of your vehicle. *There are some models that cannot be installed, so please check carefully before ordering. *This product is only for motorcycles with a displacement of 249cc or less and a headlight power source of DC or AC.Do not use this product for any purpose other than motorcycles. *Please check the shape of the valve before purchase.
*The specifications and appearance of the products are subject to change without notice. *The brightness and color values on the product pages are an image of the difference between each product, which is difficult to understand on paper.This may differ from the actual product.Please refer to the values of product specifications (general performance values such as power consumption) as a guide. *The color of the product may differ slightly from the actual color due to printing. *Product prices and designs are subject to change without notice. *PH7 / PH11 / PH12 are product names and PH is a registered trademark of M&H Matsushima Co. *The values are standard values and are not guaranteed.
* The image is only for reference. The image shown may differ from the actual product.
[3-sided light emission for comfortable light distribution] Wide illumination is possible by adopting 3-sided illumination. In addition, the reflective range is sufficient for high beams.
[assisted high beam function] An "assisted high beam function" is implemented to slightly turn on the low beam at the same time when the high beam is switched, thereby securing the front side of the driver's field of vision. High beam visibility is much more comfortable.
[Designed for minibikes] ・Optimized size Optimized size for minibikes with small space. So it is easy to replace and install on any vehicle.
・Angle and orientation can be adjusted When fixing the bulb, the angle and direction of the heat sink can be adjusted to avoid interference with the vehicle side wiring and peripheral devices such as the rear of the light case.
・Fully compatible with AC power supply The controller is equipped with a high-performance capacitor that can handle a wide voltage range of up to 160V, and can be used for both carbureted and fuel injection vehicles as well as battery-less vehicles.
・High power LED made by CREE Compact size, multi-faceted light emission, and high power LED (XP-G3) made by CREE which is durable and bright.
[Simple product configuration] Simple product configuration for smart installation. Because the harness is long, the controller can be fixed to any position such as the front cover or the frame.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
(This is a revised post from August 03, 2021. Please delete the previous post.)
Quantity for PCX:2pc. I bought a set. After riding for a while, the Single Light did not light up. When I checked it, it turned out that the contact of Connector was bad. There is a problem of the Connector on the PCX side, but contact failure does not occur in OEMValve, so it may be the compatibility between Connectors, but I think it will be stable if a more solid Connector is adopted. If you have the same symptoms, I suggest you recreate Wiring with Bullet Terminal or another Connector.View Detail
I heard that Chinese products are easy to break, so I bought this domestic product. Quantity for PCX125:2pc. Set use. After 1 year and 2 months, one of the low beams is not lit (with a slight light). The high beam lights up fine, but this makes it useless. I thought it was a safe domestic product, but I was disappointed that the quality did not seem to be good for the price. The warranty is not valid, and it is better to buy a cheap Chinese one to prepare for the breakage.View Detail
'11 SUPER CUB110 (JA07) I did my best to install it in. As a result, I could not install it. I thought the product itself was very nice and bright as expected.View Detail
The head bulb of JA07 is HS5, which is curved and the reflector is round and large. It's a Multi-reflector, but the good aspects are not utilized at all, and it's not as good as the old iron CUB. I was fed up with the darkness. (By the way, in JA10, the successor model, Valve is now HS1=H4 and Reflector is (Even the square shape is quite bright)
So I replaced it with this Valve, and the change in HI/LOW is very clear, especially with the I think LOW is very good as it illuminates Wide.
However, the heat sink of Valve is Large, and it can be inverted (required in JA07) to change the angle (required in JA07). Part of the heat sink is notched) also interferes with Wiring and Cable in Case I had a lot of trouble installing the LightBody (it's pretty hard to push it in).
Also, I had to adjust the angle of the optical axis as much as possible before I could use it properly. MinusPoint.
Mounting HeadlightHouse of JA 07 is narrow and it is HS5 with few compatible items, but it was a pon attachment. Valve 's Heat sink was reinserted inside out so as not to interfere in the LightHouse. Controller removed Leg shield and installed in Frame behind Air cleaner box. ■ Distribution and brightness When viewed from the front Valve attached to ▽ is Low, only one side on the sky side, High side and two sides on the ground side are added. Light distribution is in a crescent-shaped shape with a downwardly pointing low, while light in a circular shape is superimposed and overlapped with low light. Brightness is Halogen ([Color] Clear) I felt it about 30% increase of. ■ Ideas It is four times as expensive as a light bulb, I would like it to last long, but since there is no fan, durability is anxious. I decided to always have a light bulb for when it runs out (OK with change of connection) Also, the electric power of 10 ~ 15 W for the warmth is sent via the power supply socket to the smartphone ? wireless ? I plan to use it to charge a flashlight. View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!