Number of Teeth: 69 teeth Tooth thickness: 13mm (same dimensions as stock 3-speed Cub and Monkey) Weight: 500-520 grams
[Reference stock primary driven gear weight] ・3-speed Cubs and Monkeys: approx. 680 grams ・Lightweight type for 4-speed Cub, approx. 615 grams
Nostalgic Sports Works (Cuby original parts)
*Weights may vary slightly depending on the solid. *These parts are for competition use only. *Small scratches may occur during processing. *Please be sure to check before installation. *The image shown is Ver.1. *Limited quantity.
The wedge-shaped hole is adopted. The primary driven gear is the lightest of its type that Kavi is aware of. From the moment you start the engine, you will be able to feel the difference in the pickup. However, the tooth thickness is kept at the stock value, so we are confident of its strength. The stock heavy driven gear of the unpowered horizontal 50cc unit is also meant to be a so-called "springboard". It is thought to be designed as a safe weight based on an overall assessment of the engine's own torque and fuel consumption. However, a stock 50cc unit, which has nothing to do with sportiness, would not be a problem, This is a category of friction loss, assuming high-compression and bore-up. You will be surprised at how good the pickups are. Recommended for stock engines as well. We are proud to say that this is a no-risk, high-return part. For those who are concerned with centrifugal clutches and primary clutches.
High gear "67T" is also available. The image shown in the left side of the 8th image is the aggressive driven gear used in the early C100. You can find more information on Cuby on Twitter and on the Q-type Enjin Products blog.
The product is processed based on a "new" aftermarket product of a certain major company. The 9th picture shows the disassembled stock primary driven gear, which has a rubber damper inside. It is obvious that deterioration is inevitable as long as rubber parts are used inside. In fact, I had planned to modify a surplus of used stock parts at Cuby.., As the base is used, it is important to know how much the base has been used and how much the rubber parts are worn out, If you don't know that, there is no reason to venture out at a high cost.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Cuby Moldy ultralight sportsprimary driven gear caught my eye So I bought it on impulse this time
I think the quality of the product is reasonable for the price range It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money As far as shopping goes, I felt like it wasn't a loss
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!