Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Material] Base part:Machined aluminum Tip arm:resin
[Set components] ・Aluminum base (Part No.697-002-*010) x 1 piece ・Resin arm (Part No.697-002-4020) x 1pc ・Spacer 15mm (Part No.697-002-4030) x 1pc ・Spacer 10mm (Part No.697-002-0040) x 1pc ・Inner assy (Part No.697-002-4*50) x 1 pcs. ・Ultra-low head bolt M5 (Part No. 800-795-3010) x 2pc
*Aluminum base "*" is a color number:1=Red,2=Blue,5=Slate Grey,6=Gold,7=Lime Green *The * on the Inner Assy is the size number:4=Φfor 14,6=Φfor 16 *It may be necessary to remove the stock inner weight. *Please check each race regulation when you use it in the race. *The image may contain other colors. *The vehicle in the image is a demo vehicle and the steering wheel has been changed. *There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
The brake lever guard is a safety part that is required by recent race regulations because it effectively prevents the brake from malfunctioning due to contact with other vehicles.
・The base part that extends from the bar end is machined aluminum, and the Yoshimura logo is laser engraved. ・The Yoshimura logo is embossed on the resin arm. ・The hybrid structure of aluminum and resin ensures both strength and weight reduction. In case of damage, each part can be replaced. ・Available in red, slate gray and gold anodized colors. ・Available for Φ14 for handlebar inner diameter 14-15.5mm and for Φ16 for handlebar inner diameter 16-18.7mm. Suitable for a wide range of vehicles. ・Weighted inner parts are used to reduce vibration of the handle.
By using the supplied Φ15mm (black anodized aluminum) and Φ10mm (silver) spacer collars, it is possible to install it in the best position to avoid interference with the throttle and brake levers.
■The length from the handlebar to the end of the arm can be selected from two positions. ・Resin arm mounting position :Length from handlebar to end of arm :120mm) ・Resin arm mounting position :Length from handlebar to end of arm:145mm)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Aluminum gives points to each color. And it can also protect the brakes when the bike falls. You have to buy a clutch guard or a handle Accessory Bar Ends because it only consists of a brake guard. Installation is easy as long as it fits the size. Delivery and packaging to WeBike in a week The packaging is expensive because it only costs a great brake guard. However, the quality is highView Detail
I purchased this guard after the bike skidded. Although it was a minor mishap without any injuries. I damaged the brake lever and it didn't brake as smoothly as it originally did.Moving forward, I decided that if I happen to tip over the bike or have any mishaps, this brake lever guard was going to bear the brunt of the impact. When I unboxed it, the feel of it and build quality impressed me and indeed could see where the cost went to. I wanted to buy a clutch lever guard but unfortunately Yoshimura did not make them. It would have completed the look.I would recommend this product to someone who wish to protect their bike from those accidental tip over scenarios. View Detail
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike.View Detail
铝合金加工部分工艺层次感、阳极氧化色彩都非常漂亮。护弓前段是塑料,考虑到轻量化和可替换性,工艺处理不是很好脱模间隙的毛边会有一点显眼,完美主义者请手动抛光去毛边。种类丰富的配件,因为是川崎厂型号,使用M8原装螺栓安装就可以了。The layering and anodized colors of the aluminum alloy processing are very beautiful. The front section of the bow is made of plastic. Considering the light weight and replaceability, the process is not very good. The burrs of the demolding gap will be a little more conspicuous. Perfectionists please manually polish the burrs. A wide range of accessories, because it is a Kawasaki factory model, it can be installed using M8 original bolts.translated by Google TranslatorView Detail
I tried several other companies' products, but they came loose due to vibration during driving, so I used Lever Guard The only thing I thought was that it was not a good idea for a Not only is it good, but it feels solid and Large satisfied with the installation However, if possible, the Bar End on the Clutch Side is also a YOSHIMURAOnLine only Quantity, not sales:I'd like to see it sold as a setView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!