*Increases vibration and engine noise with increased bore. *Install an oil cooler and an oil temperature gauge to control the oil temperature.Continuous running at high temperatures (over 100°C) may damage the engine. *You will need to purchase additional parts (reinforced clutch, reinforced oil pump, reinforced cam chain).The engine may not be able to withstand the increase in power and may be damaged if the stock parts are not used. *The carburetor and exhaust must be replaced to achieve the specified performance.(Depending on the model, the fins may come in contact with the stock carburetor) *In the case of this product and stock camshaft, the low and middle speed torque will be increased, but the maximum rpm will be lower than stock 50cc.If you want to extend the MAX rotation, please purchase High Camshaft (98332). *When installing on Magna 50, it is necessary to cut the limiter.(Unplug the pink wire coming out of the CDI.)
●Big fins for improved heat dissipation. ●Flat shape to match the stock head shape.The piston ring is a 3 ring type for better sealing at high RPM.
Big fin cylinder with high heat dissipation.Big bore kit to use the stock head. Easy to use big bore kit using the stock cylinder head. It is the best choice for the first time to increase the bore, and you can easily experience the torque and power up in the low and middle range. Lightweight aluminum alloy, high durability cast iron sleeve cylinder & piston set. The cylinder has large fins for high cooling effect. In the case of the 88cc kit (Φ52cylinder), the cylinder can be used and upgraded to the Hyper head later on, and the crankshaft can be replaced to upgrade to the maximum 110cc specification. Please use it as the first step of 4 mini customization.
[Compatible model] Monkey / Gorilla 12V (Frame No.)From Z50J-2000001, AB27-1000001) Monkey / Gorilla 3.1PS 6V (Frame No..:Z50J-1600008 to 1805927) Monkey Baja (Frame No. 1)From Z50J-1700001) JAZZ (Frame No: From AC09-1000030) Magna 50 (frame no..: From AC13-1000010) Benly 50S (Frame Number: From CD50-2200005) Benly CL50 (Frame Number: From CD50-4000001) CD50 (Frame No.: From CD50-1500001) DAX50 (12V) (Frame No.: From AB26-1000001) Monkey R (Frame No.: From AB22-1000017) Monkey RT (Frame No.: From AB22-1007601) Chaly (frame no: From CF50-3400001) Super Cub 50 (Frame No..: C50-9000001 through 9501323, C50-9600001 through 0095210, C50-0200001 through, AA01-1000001) Little Cub (Frame No.: From C50-4300001, From AA01-3000001) Motola (Frame No.: From AD05-1000018) Jorkab (Frame No: From AF53-1000001) Solo (Frame No: From AC17-1000001) XR50R (Frame No..: From AE03-1000001) CRF50F (Frame No.: From AE03-1400001)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I had set my car up with KITACO's 85cc, but 85 is quite maneuverable in terms of Engine Displacement Volume, and I was worried about the availability of parts in the future, so I decided to go with DAYTONA's 88, thinking that 85 and 88 are the same. The deciding factor was Cylinder's sturdiness.
good point Since the replacement is only above the waist, it can be done in about 2 hours if you are familiar with the process. Of course, power will be available. ● High octane is recommended, but I think even Regular is Large sturdy. I appreciate the fact that all the packing and other items are available. I think Cylinder is very durable.
A bad point The maximum speed will be a headache, so please increase at least the number of hits on the FrontSprocket. I set mine at 13→14.
The Engine Displacement Volume that can run properly above the waist is limited to 88. Even though it is the limit, there is a safety margin. I think even more so since I tried Squat before this.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!