*There may be changes in product specifications due to the manufacturer's reasons.
[MORIWAKI K&P Micronic Oil Filter] This product uses a uniform 304 stainless steel filter with a maximum size of 35 microns to catch sludge and metal at the level of a few microns. The flow is 7 times greater than that of a fiber filter, reducing the load on the oil pump and contributing to increased power and torque. In addition, this product can be disassembled and cleaned, and the impurities remaining in the filter and magnet (equipped with neodymium rare-earth magnet) can be visually checked during cleaning, making it ideal for engine condition management.
■Main Features ・High oil filtration performance. ・Up to 7 times the oil flow of fiber filters. ・Greatly reduces the time required for the bypass to just open and circulate, always filtering. ・Provides ideal oil pressure in a short time immediately after engine start. ・It reduces the load on the oil pump, contributes to increased power and torque throughout the entire range, enables excellent oil flow, and improves oil pressure and oil temperature. ・Neodymium magnet adsorbs metal even at high temperatures. ・The filtered impurities can be easily checked visually and the condition of the engine can be monitored. ・FAA / PMA certified for quality trusted by the aircraft industry. ・Can be cleaned with commercially available parts cleaner and can be used repeatedly.Economical and environmentally friendly.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
15412-MGS-D21 compatible high-performance Stainless MeshFilter. I have been using Stainless MeshFilter made by FLO on my Large Motorcycle, but I had given up hope that such a tiny Stainless MeshFilter with SmallEngine Displacement Volume would ever be released. I had given up on the idea that there would ever be a Stainless MeshFilter with such a small engine displacement volume, but MORIWAKI (made by K&P) has released it. Thank you very much.
Stainless MeshFilter has the following Merit Cleanable and semi-permanent Low filtration resistance ⇒ Reduced power loss, preventing lubrication line velocity reduction With Neodymium magnet Idling stabilizes
Although not mentioned in the product description, in my experience the Stainless MeshFilter makes idling even more stable than the NormalFilter. Since I have a 2VSuper head with a high RPM Spec. (wide ValveOverlap), Idling tends to be more unstable than Normal head, but this has made it much more stable. https://imp.webike.net/diary/230371/
They said it could be disassembled and cleaned, but there were no instructions on how to disassemble it or other maintenance work. I will ask MORIWAKI, but they are unkind.
Lastly, the price is too high. made by FLO and the market sells them for about half the price… This makes it difficult to get the original cost even if it can be used semi-permanently. The cost is too bad. Converted at about $700 Filter, it is equivalent to 24 times. If replaced at 3000 km, it will be toned down at 72,000 km. (Lol) In my case, I bought it immediately, but everyone should consider the cost-effectiveness of the introduction.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!