In webike have best product hiperformanceBuying this carb i thought is just a waste of money.But im wrong, THIS CARB IS SUPERB!!!This saves me a lot of fuel, its fuel efficient
ModernHeadSpec. It installed in 110cc GORILLA of.
☆ Mounting ☆
I think that it is better to think that Funnel in Set is Gorilla tank and think that it is impossible to install. Although it may be installable if it is an external Short funnel, Cost performance is bad.
If you attach it to GORILLA, we recommend purchasing a Set without Manifold, separately purchasing GCraft's Variable Manifold, and placing the carburetor in the proper position.
DAYTONAetc. If you are wearing Steering Damper, Frame mounting Brackets will hit. I escaped with paper, but it is pretty tough.
☆ Performance ☆
If you change from PC, PE or VMcarburetor you can feel the change obviously, but if it is a change from TM24 or MJN 24 where Setting is determined "Dramatic change" It is better not to expect. The idea that the power will go up if the caliber is Large is wrong. Then, if you are told what is different, "From extremely low speed region to high speed region, it will rush without Stress" Is it the place I told you. Of course, depending on the setting, I just dropped throw slightly and just bought a little Main slightly.
☆ Overall rating ☆
It's not for amateurs, but for Customcarburetor "Luckiness at low and medium speed" People who suffer from it are worth using. However, please keep in mind that only handling depends on individual's Sense.View Detail
I received it from the box to confirm the contents after it arrived, the caracheal sound from carburetor Body.
At first I thought whether it was CableStopper or Float but because the sound is heavy in the Float chamber, it is decomposed by Exhaust Chamber.
When I opened it MJ came out with a polo.
It is not cut straight enough to think that AngleHolder's threading is bad at Chinese state. Even if MJ is inserted by hand, if it is tightened with cheeks, it seems that it seems to be frustrable, so it seems to be an initial malfunction.
What about quality control?View Detail
I replaced carburetor with Bore up.
For MONKEYSHIFT UP made Head - It attached to 88 ct KIT with Cam.
28 I thought that Large would be too big, but I made it 28 pies because I plan to make it to 110 cc by Crank exchange because the price does not change with 24 pies and it is Large.
The installation itself was completed without processing except Throttle Wire was exchanged for exclusive use.
When expecting to hang the Engine, adjusting Throw to Large miscellaneous and running it will slow down when Throttle opens Bat, but will start to feel comfortable if it is over medium speed.
The 1st and 2nd speeds will flow to Smooth all the way to Limit's 10,000 revolutions!
I was betrayed by meaning and it is surprising that Response is so much as it was shipped.
Conversely, it may be difficult to think about setting out.
Although I had attached the VM 26 to the KSR 110 a few years ago, it is the same as this and it feels like running somehow with a pump.
Because it is not cheap things, I would recommend this if you endure buying another carburetor and regret it!View Detail
There were various things such as installation Space was narrow, Fuel Cock was hit, but I managed to install it somehow.
It is convinced that MONKEY has a setting and there is not GORILLA for this reason. 108 cc E / G, but as it was in the initial state E / G start, I ran and felt goodness of YOSHIMURA. I would like to enjoy the performance while setting out this timeView Detail
♪ which was the highest when sticking although it was slightly troublesome to attachmentView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING