Genuine Honda Crank Case Cover Gasket for GROM125

About quality and texture, I can confirm that the quality is great and that the material used is chrome steel.About the feeling of use, Just on of the radial ball bearings needed for the new engine that I am building from newly purchased parts from Honda. It has done its job supporting the transmissions countershaft within the right crankcase half.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the ones to purchase together to allow for the assembly of the transmission are the other three radial ball bearings.Difficulty of installation, I can say the fitment of the radial ball bearing for my installation was average due to already having access as the crankcase half is new and the process is explained in the service manual which requires the radial ball bearing to be pressed into the crankcase using specific tooling so not to damage the bearing.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda radial ball bearing that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is copper.About the feeling of use, One copper sealing washer was needed for the new engine that I am building from newly purchased part from Honda. It has done its job in sealing between the crankcase and the flange bolt for the tensioner oiler port.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the copper sealing washer is the 6x18mm flange bolt as they all work together on the installation.Difficulty of installation, I can say the fitment of the copper sealing washer for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda copper sealing washer that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This was a part that was needed for the CBR1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

Another Quality Honda part that has been use to bring another honda motorcycle back to life. This part was crictial to maintaining the quality that honda produced fromt the factoryView Detail

Another Quality Honda part that has been use to bring another honda motorcycle back to life. This part was crictial to maintaining the quality that honda produced fromt the factoryView Detail

I was a little concerned about this old bike as some of the hoses were really poor and deteriorated badly. With it being so old, I did not think I would be able to get genuine Honda parts for the replacement but to my surprise, you can still get them. Happy days. After checking Honda schematics for the right parts number, I did search locally and was unable to find one as they had been discontinued here. I was wary of finding them anywhere until I checked Webike for it. Wow, you can still actually get them and the price I paid was cheaper than any after market one I could find. I did have a couple of other parts in my order for this bike and got them all shipped as one and saved a few pounds too. The shipping took 7 days and all my order was intact and perfect. The hose does come in the standard Honda packet and was surrounded with bubble wrap. As this is a hose it needs to take a bit of heat from the radiator coolant and with the quality of this hose, I know they do last. Unfortunately after almost 35 years of UK road grime and grit, the rubber hose has taken a beating and needed changing. This new hose is fantastic. Perfect. The quality is plain to see when you handle it. The hose is flexible but is a double walled hose as it needs to withstand some heat. Not really much else I can say about this as there were no issues in the hose or in fitting it. Looks a lot better than the old hose which did by miles. Very pleased. View Detail

This is the second part of the refresh on this old bike that came in from a customer. A couple of panels needed replacing as they are all scratched. The best solution was to just buy genuine Yamaha panels. Webike was super easy to navigate to find the right panels for this bike. Also, the price I got these for was well lower than what I could buy locally. Not a problem, in my basket with a few other items. I had all shipped using EMS and my delivery arrive in 5 days from being shipped. This was quite a large item but Webike warehouse packaged it really well. The side cover came in the standard Yamaha packaging but also were covered in bubble wrap to stop any scratches or damage. The panel itself is a gorgeous glossy grey which matches the bike perfectly. It is plastic but it looks as if it has been painted extremely professionally. The alignment areas all fitted perfectly, meaning the quality is excellent. The fitting was super easy as it is literally a few bolts. This makes the bike look at least 10 years younger. Very happy with the outcome of this refresh. Thanks Webike. View Detail

A bit of a spruce up of this older YZF-R1. Some of the emblems were looking tired and just needed a refresh to make them look presentable again. This emblem was not hard to find when you check the Yamaha schematics for the model and year. On Webike, these emblems were really great value and far less than I could source locally. This was the left side rear fairing emblem which needed to be the exact same as the other side for the bike refresh and needed a genuine emblem as only that would look as it should. Along with some other parts and the right hand side rear emblem, all shipped together by EMS and delivered in 7 days. Everything in the package was packed neatly and securely and these were kept flat as you don't want bent emblems. This emblem looks super slick and crisp edges makes the world of difference. This genuine Yamaha emblem is a gorgeous red and black glossy emblem with the original R1 logo and all the colour is super clean too. I have had some that look slightly dark grey and not really red enough but not these, perfect match for the bike colour scheme. Really impressed with the quality of this emblem for the old girl. I enjoy fitting decals/emblems. Now they are on, the bike looks like a proper machine again. Thanks Webike for providing items that are hard to get here in the UK. View Detail

This bike was being restored back to how it should look out of the factory. There were a few parts that were either missing or damaged beyond repair. One of these was the cable holder for the front mudguard. I was happy to find that Webike did actually stock these and was available to ship within a couple of days. I found the right part number however by using Yamaha schematics. Not too difficult really. The cable holder from Webike was really good value for such a unique part. Better than I could source locally but that would take 2 weeks for the Yamaha dealer to get it. Anyway, with a couple of other parts for the RD350 I got them all shipped using EMS and the package arrived in 7 days from being shipped. The cable holder did come in the Yamaha packaging and was inside a bubble wrap envelope. The cable holder itself is a gorgeous shiny chromed one. The quality is perfect and the threaded section is smooth as butter to add to the mudguard. I did have to remove the speedo cable to slip through the cable holder but that was as difficult as it got for this job. Threaded onto the mudguard and that was complete. Yet another top quality part from Yamaha and by way of Webike. Brilliant. Thanks guys. View Detail

This was a set for the R1200GS of a customer who wanted to try the SBS brand for themselves. Although this is a large powered bike, obviously it will not be going near a track. So these will be great for the bike. Finding the correct part was pretty easy as I visited SBS website and put my R1200GS model details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 7 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own SBS branded packet and arrived with no chips or any visual damage at all. The sintered material looks really coarse so no doubt they will stop the bike when needed. They were fitted really easily and without a hitch. After speaking to the bike owner a few days later, they confirmed they have a great initial bite even for the rear was brilliant and with no ill effects. All in all, very pleased with these pads. I look forward to trying them on my own bikes. Thanks Webike. View Detail