786.55 PHP
(2,116 JPY)
4 (4 Reviews)
Poor
The stuff is good, but I didn't need it!Purchased to remove Locker Arm on xs250sp 4a8.
I bought it without checking because it was mentioned in the tool section of the service manual and was also used in the photo of the procedure for removing the Locker Arm.
As a result, the Bolt of Locker Arm was M8 and the size was not M6.
If you check the photos of the procedure carefully, it is just a Bolt. The color is different!
I bought a M8×180mm Bolt for 300 yen at a nearby Home center and was able to remove it successfully.
Things are good. I just didn't need it.
Reviews For YAMAHA YAMAHA OEM Rocker Arm Shaft Puller From Other Webike User
Very Good
Maybe we didn't need to.I bought this to remove the locker arm shaft from my SR400, but I didn't need to use the slide hammer. I didn't need to use the slide hammer. I just screwed it in and pulled lightly, and it came out easily.
If you have a bolt that is as long as the screw diameter of the Locker Arm Shaft, it should be sufficient.View Detail
Most Viewed Reviews Of YAMAHA Other Motorcycle Specialized Tools
Excellent
OUTIL MOTOBonjour, je suis très satisfaite, du produit, envoi très rapide, très bonne communication, suivi de commande,
je vous remercie pour cette prestation, cordialement Mme BROQUET--------------------------------------------------------Hello, I am very satisfied, the product, very fast, very good communication, order follow-up,
Thank you for this benefit, Regards Mrs GROQUETView Detail
Excellent
OEMs are sure.Since it is an OEM, I don't think this is the best way to go about it.
I don't know until I need to be concerned about OEMs.View Detail
Very Good
Maybe we didn't need to.I bought this to remove the locker arm shaft from my SR400, but I didn't need to use the slide hammer. I didn't need to use the slide hammer. I just screwed it in and pulled lightly, and it came out easily.
If you have a bolt that is as long as the screw diameter of the Locker Arm Shaft, it should be sufficient.View Detail
Very Good
Maybe we didn't need to.I bought this to remove the locker arm shaft from my SR400, but I didn't need to use the slide hammer. I didn't need to use the slide hammer. I just screwed it in and pulled lightly, and it came out easily.
If you have a bolt that is as long as the screw diameter of the Locker Arm Shaft, it should be sufficient.View Detail
Very Good
That's a real ManufacturerSpecial Tool!It's sturdier than the cheap ones, it's a Yamaha tool so you can trust it
However, it's a waste of money because it's a low frequency of use versus a high investment
The Special Tool of SEA BASS is more massive, but you can buy it because the price is 16,000 yen It wasn't
I think it's appropriate for Sunday, who has the disposition of Japanese people who choose to pay the middle price
The teeth are not sharpened to bite into GEAR, so it can only be used for ClutchView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING