247.93 PHP
(667 JPY)
237.15 PHP
(638 JPY)
(4% OFF)
3.3 (3 Reviews)
Very Good
I haven't used it in a long time.I used it on my XG250 TRICKER quite some time ago, but recently I have been storing it in my Parts storage, forgetting how easy it is to use Tatsumi's Change cover.
The W800 OEM Change Pedal had a hard rubber, and even Boots had a painful case, and we had replaced it with the Tatsumi pedal, but the rubber was too hardened to separate from the Arm.
I was unable to use my favorite product, so I pulled it out of storage for the first time in a long time and installed it.
The feeling is that the material is a little thin, but the protection of Boots and Shoes is sufficient, and there is no pain in the toes without feeling stiffness.
When I had XG250 TRICKER, I had a lot of Shift changes and a hole was made from the top of the Cover, W is not so much and there seems to be no pain in the Cover so far, it looks like it will last a bit as it is.
We have reaffirmed that this is not a bad product because it is simple, easy, and effective enough.
Durability depends on the Machine, but I think the performance is reasonable and not bad considering the price.
Reviews For MADMAX Universal Gear Change Pedal Cover From Other Webike User
Average
To prevent shoes SauceIf it is not Riding shoes, Change Pedal operation will do quite a lot of shoes.
I will substitute somewhat for Cushion with this.
It was possible to install in most Motorcycle.
However, Rubber was not very strong, and I was able to break it quickly.View Detail
Most Viewed Reviews Of MADMAX Other Step / Back Step Options / Repair Parts
Very Good
Modified and installed on GB250 CLUBMANInstalled on GB250 CLUBMAN.
Since it could not be attached as is, the pin side was shaved 5mm using a grinder. If the amount of shaving is wrong, the angle will be wrong.
The footpeg rubber is not removable, so when it wears out, the entire footpeg must be replaced.View Detail
Average
OEM style Footpeg for Yamaha that can be replaced on the cheap.I replaced the soft, airy footrest of the Yamaha MT-01 with this SolidRubber one.
However, as shown in the note, when the Pin is Crimp, it is necessary to remove and replace it by shaving off, and the processing had to be done. It is necessary to think whether it is possible to exchange only the Footpeg only by removing the installation of the Pin before buying it, and whether there is a necessity to attach it until doing so when processing is necessary.
This product itself does not have a particularly superior finish compared to the OEMs, and it seems to be a product that was designed for cost performance in repair.
The Rubber of OEM style is stretched, but only the Rubber can not be replaced. When it decreases, it becomes the exchange of the whole Footpeg.
If you like solid rubber, it is worth to change. If you like solid rubber, it is worth to change.
It is classified as a Universal Product, so in that sense, you need to think about how you will use it on your motorcycle before you buy it.View Detail
Average
To prevent shoes SauceIf it is not Riding shoes, Change Pedal operation will do quite a lot of shoes.
I will substitute somewhat for Cushion with this.
It was possible to install in most Motorcycle.
However, Rubber was not very strong, and I was able to break it quickly.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING