I installed it in Rear wheel of Addressv 125. Although the price is about half of the price of two bicycle shops, Valve is also changed at the same time on Tire exchange on March 5 this year.
As of July 23 (About 5 months) There was a crack in Rubber a bit in. It is about 2000 km in mileage.
In my case, if I reduce the mountain by 4 to 5 I will exchange Tire (1 to 2 times per year) So since we will exchange Valve new goods every time, those who are riding as it is for 2 to 3 years are worried though they are not worried.
As you can see, it's just an L-shaped version of Straight's normal one.
Normally, I would remove the Cap, attach the plate with Nut, and use the ”Lever's principle” to pull it out from the inside...
I was able to assemble the first one without any problems, so I tried to assemble the second one... oh no, there was a crack in the rubber part of the tip.
The third time I tried it, it was the same. (Wheel's Valve Hole is an iron PRESS product, so it gets cut off by "Sharp GizaGiza")
So, "Sandpaper." I smoothed the corners of the valve holes with Protect Valve Hole with Tape I did and pulled it out. (But it still left a mark, so you might want to make a jig and assemble it or ask for one)
When I apply Gauge, I have to hold Valve because Valve becomes ”squishy”, but it is inconvenient.
As a jig plan
1)The hole which Valve passes through is opened in both sides of the L-shaped gold plate, and it passes through the long side and it is fixed Nut through the screw part and it turns on the short side. [Valve and jiggle] to make a rectangle.
(2) Place a large-sized "object" as a fulcrum under the jig and pull it up like a normal Valve.View Detail
The price is also cheap but the texture and so on is as it is. Although it is in use, the rigidity is Funafuna feeling, but if it is exchanged every Tire exchange, it seems that durability is about thatView Detail
Convenient L-TypeValve can be purchased at this price, and 1pc. Cospa is undoubtedly a turnout as it can be purchased from.
However, although it may happen, there was a crack in the Rubber part at the time of wearing. I always used Dunlop's, which was not the case.
Since it is a part which will not be exchanged except when exchanging Tire, it will return to Dunlop from next time.View Detail
There is no problem.. Whether cospa is okay.
Exchange yourself and friend Tire once in two changes
To do. Because it is late after a thousand break.
Cheap things, let's exchange.View Detail
The commuting Scooter's Front tire came down and I ordered and replaced it with Tire exchanges. It was the same shape as OEM so we could use it without problems than I was worried about. After all Elbow-like is better for Scooter. If it is Straight, it will be difficult to insert Valve a little bit when entering Air, it will crack Valve, so this is the correct answerView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING