1,933.68 PHP
(5,200 JPY)
1,573.35 PHP
(4,231 JPY)
(19% OFF)
3 (4 Reviews)
Terrible
The lowestWrite it honestly?
Adjust interval adjustment part
Clearly, it does not work
Is it the same structure as MONKEY Wrench
With the influence of the severity of the rattling which is unthinkable
It does not move...
The value of the price is There is none.
Reviews For DAYTONA Slide Type Ring Spanner From Other Webike User
Very Good
The on-board tools are difficult to use.The pin spanner of MC41 is not exclusive design, and the pin is shallow. The handlebar is also inconvenient.
The thinness and the length of the Handlebar are necessary factors because it is inserted between the Chain and the Swing Arm when in use, and this product meets those requirements.
The adjustment mechanism is that of a cheap MONKEY Wrench, and it is not smooth and has some rattle. However, the adjustment itself can be done normally, and there is no need to adjust the width as tightly as Bolt/Nut, so if the purpose is only to adjust the pre-road, it is completely sufficient. However, in such a limited use and frequency of use, the feeling of being expensive cannot be denied.
If you are going to use this product a lot, you might as well use Honda OEM Kowa Seiki, although it is more expensive. Therefore, this is a product of the halfway position.View Detail
Average
Size is good where you can adjustI bought it for adjustment of Rear Suspension.
We anticipate that there is not much turn as well as adjustable as to be able to use elsewhere, choosing cheap ones price.
Although it has the same structure as MONKEY Wrench, making slide parts is better than that of tool Manufacturer, so it is better not to expect too much.
When making adjustments, I pushed Head lightly in the direction of movement and moved to Smooth.
Perhaps you want to apply a large torque Torque, etc. I think that it would be better to buy a solid one, solid, or expensive things.View Detail
Average
Since it is a hook wrench of an adjustable (a size is variable), it is convenient when it owns two or more vehicles.
Since the root has three eighths of holes, the torque management by a torque wrench is also possible, and it can respond also to boltinSince it is a hook wrench of an adjustable (a size is variable), it is convenient when it owns two or more vehicles.
Since the root has three eighths of holes, the torque management by a torque wrench is also possible, and it can respond also to bolting of a head pipe.
However, since the main part is thin, probably because rigidity is slightly insufficient, it is hard to turn in the case of initial adjustment of rear suspension a little.
Moreover, when using a torque wrench, the part of the die length from a tip to the insert hole of 3/8 must be calculated and used, but the equivalent is [ some ] unstated in a package.
Such goods like a special tool want the statement of a manner of use.
I think that the spread of such goods for DIY is achieved by doing so.View Detail
Most Viewed Reviews Of DAYTONA Other Wrenches
Very Good
The on-board tools are difficult to use.The pin spanner of MC41 is not exclusive design, and the pin is shallow. The handlebar is also inconvenient.
The thinness and the length of the Handlebar are necessary factors because it is inserted between the Chain and the Swing Arm when in use, and this product meets those requirements.
The adjustment mechanism is that of a cheap MONKEY Wrench, and it is not smooth and has some rattle. However, the adjustment itself can be done normally, and there is no need to adjust the width as tightly as Bolt/Nut, so if the purpose is only to adjust the pre-road, it is completely sufficient. However, in such a limited use and frequency of use, the feeling of being expensive cannot be denied.
If you are going to use this product a lot, you might as well use Honda OEM Kowa Seiki, although it is more expensive. Therefore, this is a product of the halfway position.View Detail
Very Good
Used in Restore of old car[How is it used?
A little niche, but old cars. (SportsCUB) It was used to remove the key Cylinder of
How was your experience with it?
Unlike Rigid's Type, the claws open, making it difficult to work with.
The nails are not under tension and spin around.
It is necessary to devise a way to hook the nail firmly with the hand opposite to the handle and then turn it.
I would like to see the tension applied in the direction of closing with the spring.
I think it's worth the price.
[Points to note]
As I mentioned above, if you work with one hand, the nails are too shallow and will slip out.
How did it compare to other products?
If you want to be sure of your work, we recommend using an adjustable Spanner.View Detail
Very Good
It worksI use it on my Monster1200R The Hook I was using to adjust the pre-road on my previous Panigale wasn't enough I was introduced to this product when I talked to my dealer It isView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING