1,157.52~ PHP
(3,114 JPY)
4 (7 Reviews)
Excellent
It is the best for the price.I used Aluminum Handlebar of other Manufacturer but changed the feeling transmitted from Handlebar to this Steel handle because it was harder to understand than OEMSteam.
Low type and less Black.
Steel is harder to make a hole than Aluminum, but I am satisfied because I personally like the rigid feeling!
I think the price is too cheap!
Reviews For FANATIC ROAD Steel Handle From Other Webike User
Very Good
Pipe HandlebarThe width and aperture angle of the handlebar are well made, and the best position can be obtained only by fine tuning the clamp part of the Top Bridge.View Detail
Very Good
It's a bargain enough for the priceI was looking for a low type of external Pipe Handlebar and bought this one
The rigidity is moderate, and I have been using it for a year and a half and there is no fading on the paint surfaceView Detail
Excellent
To MOTARD?Traditionally it was a shape unsuitable for MOTARD, and hands were in the way when Hanging on.
The feeling attached is that the position of the arm changes considerably inward.
I think Steel is hard to break so it is cheap so buy it.
After positioning properly, it is possible to use it without problems if fixed with Vise and open fixing hole.View Detail
Excellent
PurchaseI purchased this FANATICFanatic ROAD Steel Handle Medium type for Position change. I was looking for something with the same shape as the current Handlebar and a little wide but there was no good thing and I was giving up. I tried purchasing this FanaticSteel handle whose price is cheap.
In product information, full width : It is described as 700 mm. The Handlebar used up to now is also the same 700 mm in the Catalog but when we measured the actual Handlebar I got it, this FanaticSteel handle was wider. It seems that there is a difference in the measurement position of the whole width by Manufacturer and this Handlebar seems to be the full width in front of the Handlebar end.View Detail
Very Good
OEM-like BlackBar handle【Deciding factor of purchase】
It was already installed in the purchase vehicle.
[Try to use it actually]
Clamp is standing so it is reasonable for this ride posture with this type of low type, OEMPosition style is good.
[Points I was disappointed]
None
【Hope for Manufacturer - Improvement points
Because it can handle inexpensively and widely, depending on the type of car, I think that it is good to have a drilling service equipped with a Switch.
【Have you compared items?】
NoneView Detail
Most Viewed Reviews Of FANATIC Handlebars
Very Good
Pipe HandlebarThe width and aperture angle of the handlebar are well made, and the best position can be obtained only by fine tuning the clamp part of the Top Bridge.View Detail
Excellent
Grip is now closer and position is easier.Megamoto's OEM Handlebar is wide and far for me, so my arms are still tired.
I chose this Handlebar from Universal because they don't seem to sell car-specific products like the RnineT.
We had to drill a hole for LeftSwitch positioning to install it.
Since the width is about 1cm shorter than the NORMAL and the aperture angle is different from the NORMAL, the Grip is closer and the position is easier.
Because the width was not made extremely narrow, the Hand guard which I wanted to add was also attached with only a drilling process.
I think the longer the ride, the more effective the change would have been.View Detail
Very Good
It's a bargain enough for the priceI was looking for a low type of external Pipe Handlebar and bought this one
The rigidity is moderate, and I have been using it for a year and a half and there is no fading on the paint surfaceView Detail
Excellent
Very good!Attached to kawasaki w 800
I liked the OEM Shape very much, but in order to install the Bar end mirror
I exchanged Handlebar
So, I was looking for Handlebar as close to OEM Shape as possible
I found this Handlebar.
The result is very similar to OEM Shape
Very high texture
These two points were very high points
It is a satisfactory product.
View Detail
Very Good
So soIt is a change from OEM.
I purchased Medium.
The textured texture is glossy and perfect for Dress-up. Brace also follows, and I think that Cospa is the strongest because it is not cheap.
However, the aperture is larger than the OEM, it is difficult to adjust the height. Motorcycle with Cowl has interference with Master Cylinder and I think that it will be aligned at Pinpoint. Without Cowl, will it be adjustment whether the bar is going away or extremely close?.
We recommend to Position who wants to sleep moderately in Race ish from OEM.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING