It is particularly suited to the old Motorcycle.
Looking at the Replica in the 1990s, you often have KIJIMA's Tank Pad.
Before attaching it, it was a Universal Centipede like Pad
After all, when you did not attach anything beside Tank, it was slippery at the time of Knee grip.
This covers the stomach hit area + the thigh sandwiched between covers so it is recommended not to worry about the shape.
I adhere it with Double-sided Tape, but I think that it is better to go carefully when this Double-sided Tape is quite powerful and stuck.
About 1 week after I started using it, I had a feeling of incongruity at the time of Knee grip, but I think it is due to the thickness of this Pad.
About half a month later I ceased to worry.
Just wearing a white series Pants or a jacket, I rub on Pad and I will watch a little black, so be careful.
Just rubbing instead of color transfer seems to have just adhered Urethane, so it turned out beautiful if you choose it.
Various types of Tank Pad are sold, but this type is suitable for LaserReplicaType of 90's. Because it is long, you need to be careful not to bend it when you stick it. If you fail, you can't remove it because the adhesive is strong.View Detail
I bought it a long time ago as I had it on my CBR, but it's now on my motorcycle I cut and pasted only the middle one because it didn't fit the shape of the tank somehow There may be many people who think it doesn't look good, but I like this kind of design
It's been a few years since it was installed and the powder has started to fall off due to deterioration, so I'm thinking it's time to replace itView Detail
The tank is slippery and round, and I have been dissatisfied with the knee grip in the mountains and in the circuit I bought it because it was there
It's a 90s Motorcycle so it doesn't look that different I cut the edge of the bike, but it's not easy to cut with Scissors because it's stuck on the adhesive part Notes It's been almost half a year since I put it on, and I've driven in the rain a few times, but the adhesive strength does not decrease However, I need to find a way to prevent dust and sand from accumulating in the gaps between the attached surfaces It might be a good ideaView Detail
CBR600RR GymkhanaSpec.
TZM50R
Used in
[Feeling of use]
outstanding
If you're a slalom guy and you haven't done anything with your knee grip yet, you should!
To ensure that the thin, truthtool sliding tank of the mini bike can be hooked up with one leg becomes
【Cospa】
The best
I didn't think it could get any better than this
There is another Manufacturer's thin type, but it's not very durable and it can be punctured quickly No recommendation
【attachment】
Cut with Scissors or Cutters to the shape you want to paste
stick
that's all
If you want to get a little obsessive, you can use pattern paper
It's a pretty strong adhesive, so if it's on a painted surface, it won't come off easily unless you melt it with something, so that's all there is to it attention (e.g. to detail)
I mean, you don't Gap while you're driving
[Looks]
It's just a sturdy Sponge sticker, so it's neat! () If you're looking for a good motorcycle, this may not be for you
It's going to deteriorate over time and look a little worse for wear
View Detail
When straddling, it became moderately Cushion and Knee grip and Hold well also well with older Motorcycle like vfr 400View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING