- I asked Shop to do the installation.If I can remove the top cap, I may be able to do the work myself. Since I will be using it in a mini circuit, I would like to change the oil viscosity depending on ...Read More
- The attached Fork Spring is softer than NORMAL and the Oil is harder.The PD Valve is a Scooter-like Valve, but it is good for the stickiness of the Fork.Because in the hanging state, the Valve is jost...Read More
- There are no performance problems with the product.I'm glad I bought itHowever, there was a slight lick mark on one side of the Initial Adjuster from turning it with a hex.Obviously, it is used.Was it...Read More
- I used it on a CBR650F...Before Impression...although the stock information stated that I would receive it in a short period of time, when I placed the order, the delivery time was extended to several...Read More
- It is supposed to be for GSX-R150, but I bought it for GSX-R125 because the distributor's website said it was for both 150 and 125. As a result, I was able to install it without any problem.I also pur...Read More
- As I mentioned in my diary, the installation is done at the same time as the Fork Overhaul, which requires special tools and skills, and takes a lot of gold and time if you do it yourself.But it works...Read More
- Ninja250SL/The OEMFork of the Z250SL is not the most comfortable to ride on the street, as it is soft and has a thrust to it that comes back to you during cornering. Still, the light weight of the veh...Read More
- I was interested in the PD Valve because the OEMFork of the Z250SL is too soft and it comes back undulating during cornering, but I was hesitant because orifice machining and cutting of the color seem...Read More
- The shape of the Initial Adjuster is completely different from the picture, and there is no Level for adjustment, so it was difficult to adjust.In the photo, there is a Level line with Plus screw. In ...Read More
- Purchased for GSX-R125Circuit Running.The rear suspension was too stiff and didn't stoke at all, so I replaced it with a YSS kit.Although I haven't run it yet, I can see the change just from the feeli...Read More
- I installed it on SR400.The F suspension of SR400 sinks down at once when FBrake is applied strongly.Control was low and there was a fear that the bottom might fall out.I thought about changing the oi...Read More
- It's a bit expensive for CUB Parts, but I installed it on my JA44.With the disc brake, it has been converted to FFork of WAVE, but the end cap is the structure which is held with C-ring, and the inner...Read More
- Basically, I agree with kamayan27, and I'll limit myself to talking about it in Race use.Brake initial behavior is good, which cannot be handled by changing oil viscosity or oil level.The lack of spri...Read More
- The ride quality is much better than the ride without damping force of NORMAL, it's a big difference!Installation is done in the Instruction Manual (mine is the English version) and The content was di...Read More
- Installed on REBEL250Before the exchange, it was bouncing and undulating at Corner, and Front at the last second to stop at the light I'm going to pull it out or something, and while I don't feel any ...Read More
- PCXFront fork still has no goods at allSo I installed it as a new product from YSS, although it's only for SpringTo be honest, I think the recoil is still a nice touch, but I have no idea what it look...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING