This is a DAYTONA Custom Selection of custom parts for the KAWASAKI Ninja ZX 25R_2020 model. A mounting bar and aluminum billet dress-up for mounting smartphones and other electronic devices around the handlebars. DAYTONA also introduce the seat bag that is convenient for touring.
Multibar Holder
Parts number: 19256
•Bar Effective Length=155mm, Pipe Diameter Φ22.2
•Steel with Matte Black Finishing
The exclusive design for model makes it easy to see the electronic devices and allows smart installation. Both ends of the mount bar can be separated, so the pass-through clamp can be mounted. Both sides of the mount bar are equipped with a Premium Zone Cap Bolt (M8 Collar Ash Silver).
Grippy Grip
Parts number: 98445
Overall Length: 125mm
Compatible Handlebar Diameter:Φ22.2
Open End
You wont get tired easily because this grip is non-slip.
Daytona original grip with ergonomic design.
Combination of two layers of material: soft material on the outside for excellent grip and a hard material on the inside, so you will not get tired even after a long ride.
It fits various mototrcycle types.
Lever Guard
Parts number: 92449
It correspond to Inner Diameter Φ14-Φ19 Handlebar Pipe
[Product Contents]
Lever Guard xPair (for Left and Right)
Sleeve Φ18/Φ13.5Φ15.5 x 2pcs/each
Hexagonal Wrench x 1pc.
Prevents the lever from malfunctioning due to external interference.
A set of brake lever guards (left and right), which is often installed on road races, is now available as an accessory for public roads. You can enjoy the lace taste in a casual way as.
Compatible with pipe handles with inner diameter φ14-φ19.
The Ninja 250 can be bolted on to the factory handlebars.
PZ Rider Footpeg PZR-01
Parts number:96557
Color: Black/Ash Silver
Material: Aluminum Cut-out
Included Parts: Ring (Red, Gold)
This set of footsteps is one of the PREMIUM ZONE series products that emphasize creativity and beauty.
Replace your OEM footstep with this CNC aluminum footstep. This footstep position is the same as the OEM footstep position.
This footstep has a dual anodized finish in black and ash silver.
Laser marking on the side of the footstep and above the holder further strengthens the impression.
You can enjoy the combination. three colors by combining rings included in this set.
PZ Pillion Footpeg PZP-08
Parts number: 96661
Color: Black/Ash Silver
Material: Aluminum Cut-out
Included Parts: Ring (Red, Lime Green)
This set of footsteps is one of the PREMIUM ZONE series products that emphasize creativity and beauty.
Replace your OEM footstep with this CNC aluminum footstep. This footstep position is the same as the OEM footstep position.
This footstep has a dual anodized finish in black and ash silver.
Laser marking on the side of the footstep and above the holder further strengthens the impression.
You can enjoy the combination. three colors by combining rings included in this set.
Master Cylider Tank Cap NISSIN for Φ42 Green
Parts number: 92735
Material: Aluminum
Corresponding Master Cylinder: NISSIN (Φ42)
This is the master cylinder cap of the PREMIUM ZONE series that brings out creativity and beauty.
This separate type master cylinder cap is made of carefully processed aluminum and features a dual anodized finish in two elegant colors. There are 3 types for NISSIN and 2 types for BREMBO. Available in 5 colors.
Master Cylinder Reservoir Cap Product Page
Handlebar End Plug Scratch
Parts Number: 93134
Quantity: Pair (for Left and Right)
This is the most popular M8 handlebar end plug for Kawasaki standard handlebar!
Available in 4 color variants.
Handlebar end plug for Kawasaki standard handlebar.
ZRX1200DAEG, Ninja250, Z250 and others. Suitable for motorbikes with OEM handlebar grips using M8 bolts.
Bar End Plug Scratch Type for Kawasaki M8 Product Page
Heavy Weight Bar End Revolver
Parts Number: 17265
Aluminum Billet Bar End Heavy Weight (Revolver) Product Page
Aluminum Billet Oil Filler Cap
Parts Number: 98403
Size: M20XP2.5
Material: Aluminum CNC
Use hexagonal wrench size: 8mm
Spec: With non-turning wire fixing hole
Included: O-ring
Material: Aluminum CNC Anodized Finished Oil Fuller Cap.
Hexagonal wrenches are used to fix the unit in place, which also has the restraining effect.
With non-turning wire fixing hole.
Aluminum Billet Oil Filler Cap Bullet Type Product Page
Aluminum Billet Swingarm Spool
Parts Number:98384
Material: Aluminum CNC
Quantity: 1 Set of 2pcs.
Compatible with DAYTONA adjustable rear stand (97103), Material: Aluminum CNC Anodized Finished
You can unify your design with bar end and oil filler cap.
M6 and M8 size can be used not only as a spool, but also net hook.
Aluminum Billet Swingarm Spool Product Page
Sequential Blinker D-Light STELLAR II
Parts Number: 10000
[Quantity] 1 Set of 2pcs.
[Color]
Body: Black anodized
Lens: Smoke
[Material]
Body: Aluminum
[Specification]
DC 12V 2.8W
Japanese Vehicle Inspection Correspondence, ECE Certification Test Clear
Mounting Part Screw: M8 x P1.25
Flowing Blinker with Edge-enhanced Body.
EMark-acquired LED Sequential Blinker.
The design with an edge to the body that matches the latest model.
LED lights up one by one from the end of the chain by Blinker ON.
The body with an edge that matches the latest model.
Sequential Turn Signal D-Light STELLAR2 Product Page
Fuel Cap Pad
Parts Number: 99145
Material: Potting Plastic
[Specification]
Carbon Style Print
Sheet Paste Type
Dress-up Fuel Cap Casually
It uses soft potting plastic that is easy to stick.
Sheet affixing type.
HB Seatbag DH-708 (Carbon & Black)
Parts Number: 95734
Color: Carbon & Black
Maximum Weight: 5kg
[Material]
Color: Leather & Black: Leather
Leather & Other than Black: Carbon Blend Leather & 1680D Polyester
[Size]
Bag Body/Vertical Approximately 285 x Horizontal Approximately 250 x Height Approximately 110mm
Maximum Carrying Weight: 5kg
[Included Parts]
Seat Bag Body, Seat Winding Fixing Belt, Rain Cover
It is a compact and sporty design that does not ruin the sportsbike design.
There are 6 line-ups. The successor model of the HB seat bag DH-707 (92613/92614).
HB Touring Seatbag PRO/S DH-742
Parts Number: 16929
[Color]
Black
[Capacity]
20-26L
[Size]
S Size
H200 x W300-400 x D300 (mm)
[Included Parts]
Fixing Belt
Shoulder Belt
Rain Cover
Drink Holder
DH-742 Touring Seat Bag PRO S Size Product
HB Touring Seatbag PRO/M DH-743
Parts Number: 16930
[Color]
Black
[Capacity]
37-44L
[Size]
M Size
H230 x W500-620 x D300 (mm)
[Included Parts]
Fixing Belt
Shoulder Belt
Rain Cover
Drink Holder
DH-743 Touring Seat Bag PRO M Size Product Page
Black Cover Water-resistant Light
Parts Number:97941
Color: Black
Water Pressure Resistance: 20000mm
with Exclusive Storage Bag
Size: L
[Basic Size]
Overall Length: 220cm
Overall Height: 140cm
Overall Width: 100cm
Seat Height: 100cm
Seat Rear Upper Width: 25cm
Rear Bottom Width: 58cm
This is a black motorcycle cover with high durability and water resistance.
A luxurious and elegant black color.
This cover is developed with a special material with high durability and water resistance that can withstand wet condition. The level of waterproof resistance possessed by this cover is quite strong, which is 20000mm. It can withstand the flow of water thanks to a special patterned coating process.
*In comparison, the water pressure resistance possessed by an umbrella is 500mm and a typical raincoat is 10000mm.
Black Cover Water Resistant Light (Size L)
Original Source [ DAYTONA CHANNEL ]
See Accessories of DAYTONA
See KAWASAKI Moto Index Page
See Accessories for KAWASAKI ZX-25R
