Model Name:VTR250
Manufacturer:HONDA
Model Year:1998
The newcomer of an Italian taste, which mounted a water-cooled V-twin DOHC engine of VT250 on its truss frame without pivots. The design, which intentionally omitted the tachometer, was very novel.
Specifications:
[Basic spec]
| Manufacturer | HONDA | Engine Type | Water-Cooled 4 Stroke DOHC 4-Valve V-Shaped 2 Cylinder |
|---|---|---|---|
| Model Name | VTR250 | Starter | Self Starter |
| Grade | - | Maximum Output (ps) | 32ps(23.5kw)/10500rpm |
| Drive Train | - | Maximum Torque (kgf/m) | 2.4kg-m(23.5N-m)/8500rpm |
| Model Type | MC33 | Curb Weight | 155 |
| Displacement | 249 | Dry Weight | 141 |
| Sales Launch Year | 1998/1 | Fuel Efficiency by Catalog | 40.0 km/L (at 60 km/h) |
| Height/Width/Length | 1055/155/2035 | Fuel Tank Capacity | 13 |
| Seat Height | 780 | Distance to Empty | - |
| Front Tire Indication | 110/70-17 54H | Fuel Supply | Carburetor |
| Rear Tire Indication | 140/70-17 66H |
[Service data]
| Standard Plug | CR8EH-9 | Chain Size | 520 |
|---|---|---|---|
| Number of Used Plugs | 2 | Chain Link Number | 104 |
| Engine Oil Amount | 2.4 | Battery Code | FTX7L-BS |
| Engine Oil (Refill) | 1.9L | Headlight | 12V 60w/55w |
| Engine Oil (Element Replacement) | 2.1L | Headlight Type | H4 |
| Front Blinker Rating | 12V 18w/5w | Headlight Remarks | - |
| Drive Sprocket Teeth Number | 14 | Tail Light Rating | 12V 23w/8w |
| Driven Sprocket Teeth Number | 41 | Rear Blinker Rating | 12V 15w |
[Machine detail]
| Motor Model Code | MC15E | Caster Angle | 25.5 Degrees |
|---|---|---|---|
| Bore (mm) | 60 | Trail (mm) | 98 |
| Storke (mm) | 44.1 | Minimum Ground Clearance | 155 |
| Compression Ratio | 11 | Distance Between Axes | 1405 |
| Ignition Method | Full Transistor Battery Ignition | Streering Angle (Right) | - |
| Engine Lubrication Type | Force Feeding & Splash | Turning Angle (Left) | - |
| Frame Type | Diamond | Mirror Screw Hole Diameter | 10mm |
| Minimum Rotaion Radius | 2.7 | Fuel Tank Reserve Capacity | - |
[Underbody detail]
| Front Brake Type | Hydraulic Disc | Suspension Type (Rear) | Swing Arm |
|---|---|---|---|
| Front Brake Remarks | - | Number of Rear Shock Absorbers | 1 |
| Rear Brake Type | Hydraulic Disc | Rear Suspension Stroke | - |
| Rear Brake Remarks | - | Rear Wheel Travel | - |
| Suspension Type (Front) | Telescopic | ABS | - |
| Front Fork Type | - | Drive Train | Chain |
| Front Suspension Stroke | - | Differential Oil Amount | - |
| Front Fork Diameter | - | Chain Remarks | - |
[Equipment]
| Seat Lowering Allowance | - | Theft Prevention Device | - |
|---|---|---|---|
| Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | S25 |
| Mirror Remarks | Genuine Adapter: Type D | Tail Light Base Shape | BAY15D |
| Electronic Device Remarks | - | Tail Light Base Shape 2 | - |
| Fuel Gauge | - | Tail Light Remarks | Glass Shape G18 Also Installable |
| Clock | - | Front Blinker Bulb Type | T20 |
| Hazard | - | Front Blinker Base Shape | - |
[Engine detail]
| Clutch Type | Wet Multiple Plate Coil Spring | Tappet Clearance (mm) EX | - |
|---|---|---|---|
| Transmission | Permanently Engaged 5-Stage Normal Shift | Idling Initial Value (rpm) | 1300(rpm) |
| Number of Gears | 5 | Needle Steps (Clip Location) | - |
| Gear Ratio | 2.733 / 1.800 / 1.375 / 1.111 / 0.965 | Float Level (mm) | - |
| Primary Reduction Ratio | 2.821 | Air Screw Return | - |
| Secondary Reduction Ratio | 2.929 | Main Jet Type | - |
| Variable Speed Vehicle Gear Ratio | - | Main Jet Number | #115 |
| Tappet Clearance (mm) IN | - |
[Other spec]
| Clutch Cable Length | - | Rear Brake Cable Length | - |
|---|---|---|---|
| Choke Cable Length | - | Other Cables | - |
| Meter Cable Length | - | Engine Number (Production Launch) | - |
| Throttle Cable Length | - | Engine Number (Production End) | - |
| Front Brake Cable Length | - |
[See Moto Index of HONDA]
[See Accessories for HONDA VTR250]
