Introducing Parts to Further Enhance Your Touring Experience on the Rebel 1100!

Table of Contents

Improving touring performance in a stylish way

Improving touring performance in a stylish way

The Rebel 250 and 500 have engine characteristics that produce massive torque from low rpm, and a low seat height for better foot grounding stability, making it extremely easy to handle for city riding and day touring. The flagship model of the Rebel series, the Rebel 1100, has been introduced. The Rebel 1100 is equipped with an engine based on the 2-cylinder Africa Twin in a compact body of the same size as the Rebel 250 and 500.
The Rebel 1100 is also available in a DCT model, making it a popular high-speed cruiser.

KIJIMA has developed custom parts for the Rebel 1100. It features a fairing kit that provides wind protection and a rear carrier that increases loading capacity, making it easier to use for city riding and touring without sacrificing the typical Rebel style. Let's take a look at some of the items that are being released just in time for the high season of touring.

Fairing Kit ●Price: 52,800 yen

This FRP fairing kit is inspired by the Continental style. The fog lamp kit can also be used together to increase comfort on long tours. The inner bracket also has a mounting bar function.

Click here for Fairing Kit Product Page

Handlebar Mount Bracket ●Price: 8250 yen

A bracket that allows electronic devices such as smartphones to be installed in the Rebel 1100, where there is little excess space. It can be mounted on top of the meter where there is less visual movement, and the maximum load capacity is 1.5kg, making it tough to handle.
*For motorcycles without fairing kit

Click here for Handlebar Mount Bracket Product Page

Fifty Pipe Handlebar ●Price: 13,200 yen

This handlebar is 50mm higher in the front and 10mm higher in the top than the OEM handlebar for a more comfortable position. No structural changes are required as the OEM wiring harness can be used. The width is 710mm, the height is 100mm, the back is 160mm, the clamp is φ25.4mm, and the grip is φ22.2mm.

Click here for Fifty Pipe Handlebar Product Page

Fog Lamp Kit ●Price: 35,200 yen

This is a small type LED fog light kit that includes a bracket, wiring, and switch required for installation. While increasing the irradiation range, the uncomfortable style also has a dress-up effect.

Click here for Fog Lamp Kit Product Page

Emblem Bracket ●Price: 2,640 yen

The bracket for attaching the Honda logo emblem (price: 3,960 yen), which is currently available for the Rebel 250 and 500, also fits the Rebel 1100.

Click here for Emblem Bracket Product Page

Bag Support ●Price: 19,800 yen

This bag support is made of φ16 steel pipe to prevent side bags from being entangled.
Two patterns are available: left and right set, and left side only. It is compatible to use with KIJIMA rear carriers, pillion grips and OEM rear carriers.
*Left side only: 14,500 yen

Click here for Bag Support Product Page

Helmet Lock ●Price: 3,960 yen

This helmet lock which is a convenient item to have when pulling over has been added to the lineup for the Rebel 1100. The main unit is made of steel with black finishing and is attached with a clamp that is compatible with φ32 pipe.

Click here for Helmet Lock Product Page

Rear Carrier ●Price: 19,800 yen

The rear carrier is designed with φ19 steel pipe to keep the image of the motorcycle intact. The size of the top panel is 250mm (length) x 260mm (width), and the maximum load capacity is 5kg. It is possible to use KIJIMA's bag support and OEM saddlebag bracket together.

Click here for Rear Carrier Product Page

LED Tail Lamp Kit ●Price: 19,800 yen

The compact image of the popular LED Core tail kit for the Rebel 250/500 is retained, but designed specifically for the Rebel 1100. It corresponds to the OEM blinkers.

Click here for LED Tail Lamp Kit Product Kit

Pillion Grip ●Price: 18,150 yen

The curved design that matches the motorcycle's body also provides a sense of security when pillion riding and stability when carrying luggage. It is made of φ19 steel pipe. It is possible to use KIJIMA's bag support and OEM saddlebag bracket together.

Click here for Pillion Grip Product Page

Engine Guard ●Price: 22,000 yen

This is a steel engine guard that has been designed for minor falls, such as falling over while standing. The pipe diameter is 25.4mm, which enables the installation of clamp-type fog lamps.