I have installed them on most of the motorcycles I have ridden so far.
Although it sacrifices some of the appearance, the increased load capacity increases convenience.
The best Merit I use is that my luggage doesn't get wet and it locks.
7,730.02 PHP (20,100 JPY) 8,845.29 PHP Save 13%
Webike Point: +201 pt
(77.3 PHP)
Delivery Information
-
Please select product form first.
Product detail
-
color Unpainted black
-
Maximum capacity (L) 39
-
Minimum capacity (L) 39
-
Maximum loading weight (Kg) 3
[Capacity: 39 liters]
Size: Depth x Width x Height...415 x 480 x 325mm
Weight: 3.8kg (including base)
Maximum loading capacity: 3kg
Components: General Base
No stop lamp
**A stop lamp can be installed as an option (E108 / 62202).
*Do not load more than the load limit of the carrier itself.
*The surface of unpainted products is rough because they have not been treated.
*Helmets may not be able to be stored depending on their size.
*Item numbers, prices, and specifications are subject to change without notice.
*Please select the same type of key as you currently use for your key set.For repair key sets, please refer to "GIVI Case Related Repair Parts".
*Details and installation image are for reference only.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
.
 |
 | ||||||||
 |  |  |  | |||||
| Insert the key into the key cylinder. Insert the key into the key cylinder. | Turn the key to the right (3 o'clock). | Push the red oval button at the top of the key cylinder. | The flap that says "PRESS" will float. | |||||
 | ||||||||
 | |  | ||||||
| Please make sure that the key is inserted and turned to the right (3 o'clock). | With the key turned to the right (3 o'clock), press down on the upper side (marked with *) of the triangle marked "PRESS". Please lock it. | When the lid is locked, turn the key to the left (12 o'clock) to lock the buttons.When the key can be removed and all buttons are locked, the lid cannot be opened or closed.After this, be sure to lift the lid slightly to make sure that it is securely locked. | ||||||
 | ||||||||
| With the top lid open, align the case with the base, lift the base with your left hand and press down on the bottom of the case from above with your right hand to lock it in place. In particular, for small vehicles, the rear suspension may be soft and it may be difficult to lock it securely just by pressing from the top, so be sure to install it in this way. |  |  | ||||||
When the button is pressed, it retracts about 6mm from the stock locking state.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![Although E260 is a thing which may be small, the Size which there are many things unstorable [ Helmet ] and was replaced with E370 is also enough, and is not a degree which passes also over many PCX125, and it has satisfied it.](https://img.webike-cdn.net/photo/article/47/1357647255247M.jpg)
![[Webike Monitor] It is satisfied with structure and capacity of <br>Case main part.
Even if it puts in a Helmet, a Rainwear, and a short form Motorcycle cover (its original work), there are a little margins.
However, when attaching a Base to a Rear carri](https://img.webike-cdn.net/photo/article/33/1347617266733M.jpg)
Apr 8, 2022
Helpful?
Dec 17, 2021
I have it on my commuter Scooter.
The recent Full face helmet does not fit in the storage under the seat because of the Aero shape.
It fits perfectly in this Box.
I am satisfied with just the right size because I am careful when I slip through the Large Box.
Helpful?
Oct 22, 2021
It's really just the right amount of large.
[How is it used?
To the Deer Baron. "The old Motorcycles are getting pretty crazy with Valve Clearance. I was ad-vise and bought it in a hurry.
It used to be a regular item at the nearby Home center car parts corner...
Was the one you received as per Image?
Simple & Compact, as per Image.
How was your experience with it?
It's nothing to write about, it's just a normal chic Snes Gauge, because the purpose of using this tool is clear. "It's so easy to use." And "It's so hard to use. I don't think you can make a product that says
[Points to note]
If you handle it roughly, the Plate will be bent and it will be difficult to use the same Plate next time.
Well, if it gets bent and hard to use, you can just buy a new one...
How did it compare to other products?
Since the purpose of use is clear and limited, there is little difference from other companies' products.
Other items that would be helpful
[ITEMS TO BUY TOGETHER
I think that the person who needs this tool is already able to do some maintenance, and I don't think that it is necessary to buy it.
[Opinions and requests to Manufacturer
I hope you will continue to sell it at an affordable price.
Helpful?
Mar 21, 2020
There is already a lot of capacity in VFR with a side case, but that's only because it's basic I introduced the Top case to store the Helmet somewhere
The side case of VFR can fit a full face, but other luggage will not fit and The side case is very cumbersome to take in and out
You don't need to size it too large for a reason, and you can use a SMART design for that reason I looked for it and chose this one It's very convenient to use, and the fixed location where I can lock the Helmet when I'm on the road was a problem for me to place it It was done
By the way, when you put a Full face in, the rest of the capacity is only about Rain Suit
I think I can do enough to put in my bathing gear for a day trip and buy a souvenir to take home
Helpful?
Jun 1, 2019
When I was younger, it was not a good idea to install a bulky top case on a slim motorcycle I thought it was a wicked thing to do
But when I became an old man myself, about 10 years ago, I had a 34-literType in the old SEROW After installing the Top case I've never realized how convenient it is to have the freedom to load a motorcycle I learned that
This 39LiterType is currently used for 34LiterType in KLX125 and AX-1 It is installed
I was anxious to see if it would be firmly attached to the AX-1 OEM Smaller Rear Carriers, but it was not If you remove the Rear Carrier from the beginning and install the Base, you can easily install it It was done
LargeThe size is as shown in the picture, and I don't think it's too different
A full face Helmet and Backpack will fit comfortably, and the Helmet will fit in the If you don't, you can fully insert your souvenirs at Touring as if you were entering anything
I now keep my tools and rain gear in my Backpack and have it stored in my Large souvenir bag You can carry a Backpack and take it home with you as a souvenir, or you can take it home with you in early summer or late fall when the temperature difference is large The point that can accommodate a jacket that has become hot and has been taken off is also antsy Thailand
Then, since the 34LiterType and Base part is common, you can use the Motorcycle It was easy to go over the Top case when it was replaced
Carrying about 3kg of luggage will improve the ride quality of the motorcycle, but be careful If you make it too heavy, the center of gravity will be too high and the handling will be Not only does it get worse, but also the frame of the vehicle itself can get bent I'm warning you..
Helpful?
New Custom Articles
