2,469.98 ~ PHP (6,427 JPY) 3,266.66 PHP Save 24%
Delivery Information
-
Please select product form first.
Product detail
Hose Material: Three-layer construction of Teflon tube / stainless steel mesh / PVC coating
Fitting Material: [Fitting/Banjo] Aluminum / Aluminum
Fluid [with/without]: None
Handling: S-style
[Size] (*Hose length: These are the standard specifications.)
・Hose 1: [20] +SF-SF+ [20] / 730 [770]
[Front hose No 1]
・Standard total length (mm): 770
・Banjo Adapter Start Side: 20
・Banjo Adapter End Side: 20
・Banjo bolt start side: S1.25
・Banjo bolt end side: S1.25
・Installation point: Master - Caliper
[Pitch]
・Master side: S1.25
・Caliper side: S1.25
[Components]
・Hoses
・Installation Manual
Japan
**There may be some colors and materials that cannot be selected depending on the model.
*Images may contain other colors.
*Please be sure to follow the instructions in the manual to install the product securely.
*Installation of this product should be done at a certified auto body shop.
*The manufacturers are not responsible for any accident or trouble caused by installation reasons or factors.
*The kit is designed with the bike in stock condition.
*It may not be possible to install if the handlebars, calipers, or masters have been replaced with other than stock parts.
*There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
Swage-Line brake hoses provide direct touch and linear control while minimizing expansion of the hose itself.
The original skirt and damper structure and the reliable caulking method are adopted, and it boasts of high safety.
High universality and a wide variety of colors are also attractive.
The assembly of the hoses is done with the same permanent joint "caulking method" as the stock products, which dramatically improves the accuracy and safety of the joints.
Both ends of the hose end have a fitting shape for easy attachment / detachment and angle adjustment, and the combination with the banjo adapter enables a wide range of compatibility.
Flexible, yet hard, Teflon tube with extremely low surface frictional resistance is pultruded.
It is covered with stainless steel mesh, which is made of the best material, wire diameter, and weaving method, and furthermore, it is protected from damage and stain by custom-made PVC coating.
The unique skirt and damper structure prevents the caulking part from directly damaging the hose even when the hose swings violently.
・High safety in compliance with IS standards.
・Japan Industrial Standards JISD2601, which is based on ISO3996, Automobile parts - Non-mineral oil hydraulic pressure.
This product has passed the strict tests for tension, rupture, pressure resistance, whip, etc. based on the brake hose assembly regulations, and boasts high safety.
The Teflon hose (commonly known as stainless mesh hose) used for SWAGE-LINE has a lower expansion rate than the stock rubber hose, which improves the transmission efficiency and allows for a more direct brake touch.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
