I installed this teflon inner pipe together with the ACTIVE aluminium throttle holder with the 2 fast throttle cables to operate the Yoshimura TMR-MJN40 racing carburetor. the size that i have chosen is the 40mm (which is the maximum for the ACTIVE throttle holder Type-2). It is a straight forward and easy installation, and after sucessful installation, the grip, the throttle response and operation of the TMR-MJN carburetor is much better and livelier. highly recommended upgrade even it is for normal carburetors.
View Detail
807.06 ~ PHP (2,100 JPY)
Webike Point: +21~ pt
(8.07 PHP)
Delivery Information
-
Please select product form first.
Product detail
**Φ42,Φ44 can not be used for TYPE-2 holder.
*Winding Diameter: There are two settings for the TYPE-1 holder of Φ42,Φ44. .
The throttle inner pipe is made of resin with excellent sliding property and less deterioration over time.
Wide range of fitting can be tested by adopting multi-hole pulley.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Aug 14, 2020
When the Grip heater is installed
The SEA BASS OEM Throttle is engraved with a Giza Giza and Rib to prevent the Grip from shifting.
I'm too lazy to shave off the Rib, so this Teflon (R) Use the Inner Pipe to attach the Grip heater.
It's a little pricey, but it's convenient because you can choose the diameter of the windings, so you can make it Large, which is close to OEM, or you can make it a little High Solo.
Helpful?
Aug 3, 2020
The diameter of the inner pipe can be changed.
This time I needed it for radiphone purposes, not for High Solo. I chose the Φ40, which is almost the same as the NORMAL, with the same throttle response.
If you don't like the accelerator operation at low speeds to become severe and difficult to ride, this is Recommendation.
Helpful?
Jul 31, 2020
Used to change the winding diameter
I used it to change the winding diameter of Active's High Solo.
I wanted to make my Solo more High Solo than the diameter that came with it, so I bought the Large diameter ones.
I'm not a big fan of the High Solo, but it's not as easy as it should be.
Helpful?
Jan 22, 2020
I'd like you to add some more information
Depending on the vehicle, you don't have to purchase the throttle holder separately, but you can use the OEM housing to make the vehicle more comfortable It may be available
It is an indispensable part of the setup when changing the carburetor, and it is easy to change the opening angle It's nice to be able to I bought several sizes in bulk
In addition to the rewind diameter, information on the thickness of the Thailand-coated part and the length of the Grip part is It would be useful if it was listed
Helpful?
New Custom Articles
