I have a 1978 kz1000 LTD B2 frame. I cut the dog legs to accomadate the tailpipe. I also ordered nitro racing rearsets. The nitro exhaust is light and easy to assemble. They nuymber the collector with the indivdual headers. I used a blind expanding pulley to remove the baffle from the exhaust. The baffle was removed easily. The inner canister is about 32.7 ID. It also came with the oil filter cover and drain plug as well as the hanger. You may have to make a bracket if your shock mount is 12 millimeterbecause it comes with a 6mmx1.0 bolt. The exhaust is beautiful and I look forward to starting it and hopefully plenty of power
View Detail
94,983.46 PHP (246,981 JPY)
Webike Point: +2470 pt
(949.9 PHP)
Delivery Information
This item is discontinued.
Product detail
Exhaust pipe material: Titanium
Exhaust pipe diameter: Φ42.7
Tail pipe outer diameter: Φ60.5
*
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
Never remove the exhaust baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
The grenade titanium silencer will be mounted with a φ90 silencer band.
It is necessary to change to a single type rearset.In this case, it is necessary to cut off the frame of the pillion step when you replace the stock one with this product.
For bikes already equipped with the NITRO RACING Pillion Step Bracket KIT Type 1, the upper part of the silencer and the Pillion Step KIT may interfere with each other due to the welding position of the mounting plate.It is recommended to use Pillion Step Bracket KIT Type 2.
Depending on the type of blinker, it may interfere with the silencer.In this case, you will need to replace the blinkers.
The oil filter cover and drain bolts must be changed to a flat type.The Flat Cover & Drain KIT is included as an component of this product and should be replaced when the exhaust is installed..
* The image is only for reference. The image shown may differ from the actual product.
[Components]
EX pipe for 1 bike
Manifold section
Tail Pipe
8 springs
Silencer
*End baffle
*Silencer band
*Silencer bracket
Flat filter cover & Drain KIT
Drain bolt: accessible
Oil filter: Assembly section needs to be detached
Center stand: Not available
New proposal of EX exhaust for NITRO RACING Z.Short tail with spartan looks and compactness.Not only its looks, but also the thorough pursuit of driving performance based on feedback from the racing field.The EX layout is as close to the chassis as possible, with a special flat filter cover included, and the centered assembly section provides a bank angle and ample ground clearance for track riding.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI Z750FX 1 , KAWASAKI Z1 , KAWASAKI Z2 , KAWASAKI Z1000Mk II , KAWASAKI Z1-R
New Custom Articles
