Machined aluminum tappet breather cover

Works as intended, this is desired if you do not have a cam cover breather. Either one will cool your bike much better than stock, however the tappet banjo must be fitted to the proper hydrolic hose to minimize oil leakage

About quality and texture - The tappet breather cover from SP Takegawa is made from billet aluminium with precision machining and a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The tappet breather cover sure is lovely to look at in regards to it's design and finishes. It was the final piece to complete the ultimate catch can setup on the Monkey 125 and combined with an oil catch tank has allowed for a clean high RPM running engine.Products to buy together - A key product to buy together with the tappet breather cover is a oil catch tank that will allow for the collection and separation of the oil from the vapour output from the engine.Difficulty of installation - The installation of the tappet breather cover is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is all that is required to secure the tappet breather cover to the cylinder head and then the breather hose to the catch tank.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the tappet breather cover is no different. The design of this tappet breather cover is what sets it apart from the regular tappet covers.About shipping and packaging - With there being no cost difference between sea freight and EMS for the tappet breather cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited.

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape, cover with a gold anodized finish and banjo fitting and banjo bolt with a blue and red anodized finish. About the feeling of use, The tappet breather cover is an impressive looking addition and serves the purpose to vent the 2 valve head which helps when you are running high RPM limits a lot of the time. Products to buy together, Other high quality parts to help improve the look of other original plain looking parts like the generator plug set would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the tappet breather cover for my installation was very easy due to the ease of access and simple nature of securing the cover onto the head using just an allen key. Cost performance and comparison with other products, The pricing of the product is great. You receive a cover made from higher quality material with a matching finish. There are other cheaper tappet covers available but not with the ability to vent the head through the added banjo fitting. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.

About quality and texture: I am happy with the quality of the machined aluminium tappet breather cover from SP Takegawa. The tappet cover, banjo fitting and banjo bolt are all machined from aluminium with the tappet cover being finished in chrome plating and the banjo fitting and banjo bolt being finished with blue and red anodising respectively.About the feeling of use: The highly detailed tappet cover looks great against the silver painted head on the Monkey 125 and the additional feature to allow pressure to vent from the head is also ideal when increasing the engines performance.Products to buy together: An additional matching tappet cover for the lower side would also be desirable to purchase alongside the machined aluminium tappet breather cover but I am yet to find one available.Difficulty of installation: The process to install takes about 15 minutes, remove the OEM Honda tappet cover then lightly lubricate the new included O-Ring and install on the tappet breather cover. Attach the sealing washer on either side of the banjo fitting and tighten down the banjo bolt. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a highly detailed and useful tappet cover as compared to the ordinary tappet cover available from most bands but the price is much high so it really depends if you need the feature of venting the head. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: It looks that the chrome plated tappet cover is no longer available which is disappoints as this finish does suit all the different coloured Monkey 125s unlike the red and gold anodised finishes that are now only available.

About quality and texture - Excellent quality, I am loving the chrome finish.About the feeling of use - I am very happy to now be venting the top end of my engine, looking forward to some high RPM runs.Products to buy together - You really need to also add an oil catch tank for this part to function correctly.Difficulty of installation - Easy install, the hardest part was deciding which way I wanted it fitted.Cost performance and comparison with other products - It is expensive for what you get but same style product not available from any other brands.About shipping and packaging - Well packed with air pillows and arrived on the date I expected it to.Any concerns, cautions, or advice when purchasing - Would have been nice if the chrome set had not been discontinued so I could have purchased that instead, now I need to find a matching cover for the bottom.