2017 ZX-14R H. G
Bar handle installation complete.
Working time is 1. It is 5h..
I managed to take a bit of trouble but somehow broke down.
However, the difficulty of installation work is low, so if there is a necessary tool there will be few problems.
Position is decided, but avoiding Cowl interference limits the angle adjustment range of Handlebar and Lever.
If it is Kit here it is almost fixed position.
Although it is a personal impression, it is a feeling that it is good if it is a little Pull back and Handlebar aperture is Flat ....
Although it flowed lightly after installation, NORMAL → tight. Handlebar Up Spacer → A little easier. Pipe Handlebar → another item. I feel like 14R approaches Naked sports like it.
Compatibility with Rear Sets is also good if it is a case of mad cow. (Manufactured by K-factory)
Just why is the noise of a draft called Piya, so we need some countermeasures.
Neck, shoulders, waist became easier comfortably. The Handlebar position is not very close but 60 mm Up has effect.
H. G Included Parts : You can complete the work at. Additional Bracket and Processing. Hose Extension is not necessary.
Since Handling and Front ground feeling changes considerably, it is necessary for Bar Weight and Suspension setting.
On the whole it was satisfactory.
12,698.77 ~ PHP (33,020 JPY) 12,998.74 PHP Save 2%
Delivery Information
-
Please select product form first.
Product detail
Bar handlebar bracket type
Position: 60mm up / 10mm back
Stock cables and hoses are available
Bracket type for mounting on top of the top bridge
Switch hole o the handlebar has been machined
[Set components]
Continental Type 3 Aluminum Handlebar: Polished anodized aluminum
Bar handlebar brackets: Machined aluminum alloy
Reservoir tank bracket: Stainless steel
*
*HBK689 fits the standard
*Up / back is a reference value at the standard installation position (measured at the bar end).
*Please purchase the side cap and weight balancer separately.
*Side caps for handlebar inner diameter Φ14mm are required separately.
*Images may contain other colorings and types..
.
Just replace the stock handlebar!Easy to install
Relieves wrist strain and forward leaning for a less tiring position!
Improved safety with a wider field of vision and more room for maneuverability.
Position 60mm up 10mm back, cables and hoses are available as stock.
Bolt on with switch holes machined in the handlebar
It can be installed within the range where no structural changes are required.
Fits SS size handlebar brace
The handlebar kit is specially designed for the 16 model because the handlebar switch hole is different.In addition, the attached reservoir tank bracket is different between the standard model and the HG model.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI ZX-14R 16-20 HG
Jun 27, 2017
New Custom Articles
