The parking lot of the house is slightly tilted.
The installation of an Aluminum Rear box.
Due to the above two points, there was a concern that the product would topple over to the Right Side when parked.
Therefore, Side Stand was shortened.
The installation was done by RED ZONE, from whom we purchased the Motorcycle.
After installation, the tilt was Larger on level ground, but no problem. Of course, there was no problem in the parking lot of the house.
The product looked great and was satisfactory.
- Instock
3,798.55 PHP (9,884 JPY) 4,227.44 PHP Save 10%
Webike Point: +99 pt
(38.04 PHP)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
Product detail
Old part number:ZE56-8029
Material: Forged A2014 material
Stock comparison length: -25mm
**Some models are available for high lift vehicles and stock vehicles.
*The inclination depends on the vehicle height.If the length of the tip does not match, please refer to the optional tip conversion table and replace the tip..
* The image is only for reference. The image shown may differ from the actual product.
Mainly lineup of short type for lowered vehicles, which is 25mm shorter than stock.
The height of the vehicle is set to avoid the instability of the vehicle body due to the change of the vehicle height, and to allow the vehicle to be used on rough roads with ease.
The removable tip can be replaced with an optional tip to adjust the height for standard and high lift vehicles.
Adopted forged A2014 to ensure strength and durability
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CRF250 RALLY 17-20
Jun 28, 2022
crf250RALLY50 Corresponds to parking lot tilt
Helpful?
Fits:HONDA CRF250 RALLY 17-20
Feb 20, 2022
Not RALLY50StandardLD
Only the LINK is installed in the replacement car, 2cm down, and the seat is removed 4cm.
Front fork2.4cm sticker
With the above Spec.
The body is leaning a little too much, but BMWs and the like lean about this much.
So, personally, I would say yes.
STAND is now easier to store◎.
But it leans too much when loaded.
1 cm Spacer- and Shock- hardened to handle
My taste and my height are influenced by Large - valued
For me, it's a good thing.
Spring is hard to work with.
But I didn't rate this product as such.
Helpful?
Fits:HONDA CRF250 RALLY 17-20
Installed on: HONDA CRF250 RALLY
Feb 9, 2021
May not be rightI was worried, but it’s notIt's well-sized and more inclined, so my precious bike doesn't fall over. AndIt is easy to raise the stand even when riding
View DetailHelpful?
Fits:HONDA CRF250 RALLY 17-20
Jun 17, 2020
Best Items for RALLY with a bit of tweaking
The hardest thing I had to do when I bought my HONDA CRF250Rally was Side Stand Height. It was Not so much on rough roads, but on public roads and on road inclination when parking, I was very careful. In fact, there was a time when it fell down just by placing it on the ground. But by adding this forged STAND, it was solved at once! The degree of security has increased dramatically. But if you install it with normal, you have to add one more part to make it the best. This stand is based on the LowdownSpec. So you need to add one more part to make it look good. That's why we're using Set color SC1510S The height of 15mm up is exquisite. Then it becomes the exquisite height of 15mm Up. However, because the clearance of the joint becomes short, not only the screw of the fastening is turned strongly but also it is fastened with the screw lock of the half fixed. Since a considerable period of time has passed since it was put on, there is no problem at present. Because it is a forged product, it is Aluminum, but there is a feeling of rigidity firmly. It is not cheap, but the price is not cheap. Every time I pull over, I feel anxious. is considerably reduced and is very good for mental health.
View DetailHelpful?
New Custom Articles
