Full Exhaust System

First time Full Exhaust System replacement, I was not used to it, but I was able to manage it by myself.
There was no Instruction Manual and I had a hard time doing it by hand ….
You'll find the necessary tools, pre-installation preparations, and installation notes right away, so look it up.

Installation & darr;
I was able to do it without removing the Center Stand, but it seems easier to remove it.
Install the flange first, and then hook up with spring. (See photo)
Install the cylinder head to the motorcycle from the cylinder head side with everything looseRoseRose→ Engage→ Hook is good for hooking up.
Put the 3 exhaust pipes together lightly, push the 3 exhaust pipes into the head, push them into the head with a rubber hammer, etc., and then fix them with a hook.
The combination of the three O2 sensors installed above and the pipe that is inserted into the O2 sensor doesn't fit together very well, so please do your best here.
From there it's the same way.
Long SpringQuantity:2pc of the O2 Sensor's pipe and togro? It looks like it's for a pipe and a toggle.
The Silencer may hit the body of the car, so it is safer to install it with it wrapped in buffer material.
Silencer fixed bolts are only on the Right side of the foot, so you can leave the Left side out.

So that's what I'm gonna do.

The sound is delightfully loud. (Watch the video on ManufacturerSite.) (Same sound as the Blue SS)

Even if it smells like gas at first, the exhaust system seems to have a break-in period, and it will settle down soon, so if there is no exhaust leak, it's OK.

I didn't feel much of a benefit from the lower fuel economy or lighter weight, but maybe the Torque and Power were a bit gone? experience. (Is it leaking exhaust …?)
It's a nice ride, so I personally don't really care for it.

As a general comment, I'm glad I bought it, it's cheap, sounds good, and fun.

But the Cover of the Pipe to attach the O2 Sensor in the picture? was not there as well as the other Review. Why? I want.

It says MaterialTitanium and the picture looks like Titanium, but it's true! Okay? I doubted until it arrived, but apparently it is Titanium, which is light

If you are looking for a RACING system (straight pipe) exhaust system that focuses on the appearance, you will find it to be just what you expect You can hear the Wilde 3 cylinder sound from the Idling and if you turn it to the revs, it's Racing Transform into a machine...Quick shifterSHIFT UP! High RPM to AxelOff! Bumping and banging, and is a YouTube search from the Manufacturer MT-A video of the 09 installation was fried

Also, since I'm running a Circuit, I'm going to replace the exhaust system and torque down the low rpm's I was wondering how much the On the test drive after the exchange, I was like, "Hmm? Did I fall? Hmm? I'm glad I was
The troughs of power per 4000rpm are nowhere near as great as they were in the past I don't feel any better than I did before 。
And the growth from 8,000 rpm is a result of the OEM exhaust system's seal disappearing I'll be thrumming

About installation
With BrandSticker!

The parts configuration is divided into Silencer and Togro It is divided into a spring joint and an exhaust pipe, all of which are spring joint! connection is also a Spring hook to Flange

Installation Impressions
Spring joint may be Large if you are not used to it If you are worried about screwing up the spring with a screwdriver, you can use I think it's better to leave it to the Shop
The finish of the togro welded part is Wilde as shown in the picture, and the installation accuracy is no problem! No exhaust leaks and spools

However, there is no Construction Manual! I had to do a Jigsaw puzzle while looking at the image of the product on my Mobile phone! I'd like a printout Print me an exploded view!

A slightly longer version of the joint spring is called Quantity:There are 2pc, so please be careful when installing them

Then, for positioning, you can screw and screw the togro and silencer parts I was relieved to be able to install it as shown in the product image

Also, the XSR900 and other product images have the Brand logo on the exhaust pipe assembly part There is a Cover in it, but it wasn't on the To Racer

Summary of Thoughts
Performance
After replacing the Exhaust System, when the Torque falls off, we are also considering changing the ECU But I'll hold off!

Satisfied with the quality and price
Titaniumium full exhaust
This price! Accuracy, Style, Volume, Sound Quality

I installed it on Tracer
The Coil Exhaust System, which can be installed without changing the Center Stand I looked for it and got there
For as long as possible (Toguro) Another selection criterion was that the overhang to the SIDE is the smallest limit
I was expecting Silencer to be small and quite loud, but it was more than I expected Silent and good!
Just safe for me (Lol)
After Fire is also less, and I don't feel that the resetting of the fuel is necessary at the moment
Only the quality is 4 stars in the remaining BALI to Pipe, but the others are rated 5
I can't get enough of the sound when Throttle is set to Wide Opening