The C125 is unstable because of the position of the stand, and the front wheel floats up when the luggage is loaded on the top case.
So I installed this reinforced Side Stand Bracket.
The Side Stand mounting is retracted to the shaft of the Main Stand for added stability.
The installation process is simple and easy.
It would be easier if you have a Spring hook because you have to take the Spring on and off the STAND.
This is a Recommendation for those who load luggage on the C125.
- Instock
3,804.7 PHP (9,900 JPY)
Webike Point: +99 pt
(38.04 PHP)
Delivery Information
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
Super Cub C125
Model】JA48-1000001 and after 【Date of fitment】18.9- 18-21
Product detail
[Material] Iron, Black paint finish
[Quantity] 1 pc
[Installation time] 0.3h
**Please note that the in-house test is a comparison based on certain conditions and is not the same as the guarantee or conditions in actual use (load capacity and stability conditions vary depending on the carrier used and the location of the stop).
*Because the stability of this product varies depending on the inclination of the stopping place and loading conditions, please make sure that the vehicle is stable before using this product.
*This product is designed for stock vehicles and is not recommended for use on vehicles that have been modified in terms of ride height.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*There may be changes in product specifications due to the manufacturer's reasons..
Reinforced (stabilized) side stand bracket for Super Cub C125.
With the stock side stand, if the load is too much for the cargo area, the load will be unevenly distributed to the rear of the vehicle, causing the front tire to lift and the vehicle to become unstable and possibly fall over onto the side stand.
Therefore, this product was designed to be more stable even when loaded on the rear carrier by adjusting the position of the side stand and the inclination of the vehicle.
In addition, the side stand switch which is a safety device can be installed as it is without canceling it by using the main body of the side stand as a stock article.
In the internal test conducted by Endurance, when the vehicle was loaded with 50kg on the back of the vehicle with the side stand stopped on flat concrete, the front tire lifted off with the stockl side stand and the vehicle tipped over, but this product had sufficiently enhanced stability.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA Super Cub C125 Model】JA48-1000001 and after 【Date of fitment】18.9- 18-21
Dec 27, 2020
Recommendations for those who carry luggage
Helpful?
New Custom Articles
