Motorcycle Seat Cushion Set Cool & Gel

This feeling is irreplaceable.Declaring all seasons a good ass!Gel and mesh motorcycle seat cushion set.

"Even motorcyclists have sore butts!"Pain in the buttocks caused by sitting in a seat for a long time.
In summer, the radiant heat from the engine makes your buttocks uncomfortable.
The fun touring will become a hard training.
The concept of this product is "to remove unnecessary riding stress".
The set includes a shock-absorbing gel cushion and two 3D mesh cushions that can be used separately or set up together.
Spring, summer, autumn and winter, to support the condition of the buttocks of motorcycle riders, is a set of seat cushion dedicated to motorcycle touring.

[I can't take it anymore.This pain in the butt.]
The pain in the buttocks becomes gradually painful after long hours of touring.
If a motorcyclist begins to swing his or her hips from side to side while driving, it is a sign of pain.
The gel cushion is made of shock-absorbing gel to disperse the seat pressure when riding.
The less pain in the buttocks, the more fun touring will be.

■Shock absorbing gel
Built-in 10mm thick shock-absorbing gel.
It not only disperses the seat pressure but also absorbs the vibration from the seat.

■Distributes seat pressure
It reduces the pain by dispersing the sitting pressure which is concentrated at the tip of the sciatic bone to a wider area.

■Non-slip EVA to reduce slippage
EVA material that transmits the pressure from the buttocks to the gel and PU inner cushion to the seat of the bike.

[I can't take it anymore.]
After long hours of touring, your clothes will start to stick to you.
In the summer, the hot air from the engine also adds to the discomfort index.
The mesh cushion is made of 3D mesh material, which is a combination of highly breathable 3D cushion and honeycomb net.
By keeping your buttocks dry, you can reduce the stress of riding.

■Forced ventilation with 3D mesh
Adopted 3D mesh with high resilience and breathability to return to its original state even if crushed.
The hot air in the inseam is discharged by the running wind.

■Non-slip mesh to reduce slippage
The bottom of the seat, which is in close contact with the bike seat, is a mesh seat that keeps the seat cushion from shifting while ensuring air permeability.

[Sore and steaming.For overlapping pains, two layers.]
Spring and summer touring season when the mileage of motorcycles also increases.The temperature is high and you feel fine, but the more time you spend riding, the more pain and steam you feel.
As the name suggests, the seat cushion set for motorcycles "Cool & Gel" can be set up with two layers of cushions that can be used individually.
It can be used according to the situation of the day.

■Guide loops for two-ply stacking
Guide loops for layering the 3D mesh cushion and gel cushion are standard equipment.

■Size design for two-piece layering
In order to reduce the thickness of the edge, the 3D mesh cushion is designed to be smaller than the gel cushion.

[Easy installation, even on wide seats.]
Designed to easily fit both sport bike seats and tourer seats that are thicker and wider.
This is a seat customization that you can do easily by yourself.

■Just wrap it around the seat to install
Simply connect the hook and loop fasteners on the fixing belt.
You can also connect the belt at an angle to avoid the latch.

■Cutting that considers the footing
The footing will change even slightly depending on the installation.
The side is cut to make it easy to put your foot out when you stop the vehicle.

■Extension belt included
Comes with two extension belts that can be extended by 5cm if the length of the fixing belt is not enough.

[Product Features]
■Shock absorbing gel
Shock-absorbing gel that disperses seat pressure and absorbs vibration from the seat to relieve pain in the buttocks.

■Non-slip EVA
EVA material to transmit pressure to the seat of the bike.(Adopted on the back of the gel cushion.)

■3D Mesh
Three-dimensional cushioning and honeycomb netting ensure high resilience and breathability.

■Non-slip mesh
Mesh sheet to prevent slippage while ensuring air permeability.(Adopted on the back of the mesh cushion.)

■Guide loops for two-ply stacking
Guide loop for layering 3D mesh cushion and gel cushion.

■Extension belt for wide seat included
Comes with two extension belts that can be extended by 5cm.

[How to use]
■How to wear the 3D mesh / gel cushion together
1. Layer 3D mesh and gel
Place the gel cushion and 3D mesh cushion on the removed seat.

2. Thread the fixing belt of the 3D Mesh Cushion through the guide loop for stacking two cushions
Pass the fixing belt of the 3D Mesh Cushion through the four guide loops for two layers.

3. Connect the fixing belt at the back of the seat
Connect the fixation belt so that the hook and loop fasteners overlap by at least 5cm.

4. Fix the seat to the bike
Fit the seat to the bike, adjusting the fixing belt so that it does not get caught in the latch.

■How to install the seat by itself
1. Put a cushion on the bike seat
Put the cushion on the removed seat.

2. Connect the fixing belt at the back of the seat
Connect the fixation belt so that the hook and loop fasteners overlap by at least 5cm.If the length is insufficient, please use the attached extension belt.

3. Fix the seat to the bike
Fit the seat to the bike, adjusting the fixing belt so that it does not get caught in the latch.