I am using it at KSR 110.
Despite doing a Gymkhana-like ride, I also wanted a high revolution Stretchable and put a Big carburetor in it, so I came to breathe in Axel's rapid opening in the low speed and low revolution range.
I tried variously to cover with Carburetor setting, but it did not improve, I was giving up if it was unavoidable.
Especially when a breathing occurs at the figure of 8 figure Turn of about 15 Meter interval, it also leads to falls immediately. Because it runs like winding some nylon, it's about 8 kilometers at BottomSpeed.
However, when this High Solo was introduced, Axel 's slight opening operation became easier, and breathing and Donzuki were no longer in the normal operation range. Apparently, winding of Cable is less when the Axel opening is small, and seems to be set so that the Large becomes larger as you open it.
"High Solo" I misunderstood that the Axel operation would be easy to go in a nude direction, but on the contrary it was a good product to improve the operability.
The price is also cheap, and you can have a good feeling even if you are not pursuing just the look.
I did not lose it by buying it.
1,682.52 PHP (4,378 JPY) 1,729.41 PHP Save 3%
Delivery Information
No Information acquired.
FITMENT
-
MIKUNI VM26
-
KEIHIN PE24
-
KEIHIN PE28
-
KEIHIN PD22
See all
Others
Product detail
For handle pipe diameter Φ22-Φ22.2
Throttle cable 1 pull only
penetrating type
Cable length: 710mm
[Compatible Carburetor]
KEIHIN PB16,KEIHIN PC18,KEIHIN PC20,KEIHIN PD22,KEIHIN CR mini,KEIHIN PE24,KEIHIN PE28,MIKUNI VM26
**Only throttle cables with a single pull are accepted.
*Cannot be installed on stock carburetor.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
Click for product search form
Click here for PDF instructions(* Manufacturer Open PDF.)
SP Takegawa's Web Catalog(*Jump to the manufacturer's site.)
(*This information is current as of December 1, 2012.Please note that there may be some changes in specifications and prices.)
.
■Details
The design of the throttle opening is also characterized by the adoption of an involute shape, in which the cable winding diameter gradually increases from fully closed to fully open, and the amount of change at the beginning of opening is gradual, thereby alleviating the breathing and starting difficulties that often occur with large-diameter carburetors.
Furthermore, two cable end holes allow you to change the amount of cable inner protrusion.
Original grip included
The grip rubber is durable and easy to operate.
With groove for wire lock
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.