Motive for purchasing
I use it on my W800
In order to change the Mirror to a Bar end mirror, the OEM's Handlebar I couldn't do it with the Weight in it, so I bought this one!
The OEM Handlebar was also good for that, so the price was reasonable, and I was able to get a good feel for it I chose something that didn't look like it was going to happen, and here it is!
Good points
I wonder if the loss of the Handlebar Weights would be a concern for vibration and other things? I thought a little bit, but with the combination of the Grip being a seismic GelSpec I'm glad I didn't mind!
But I don't know if there's a little vibration in the arm that I'm holding thanks to the Grip But the Mirror on the Bar End is a little blurry
The grip sensation is not that different from OEM and it runs without any discomfort
What I liked about it
Not particularly
Installation difficulty
I guess I just used a Drill to drill a hole
I carefully adjusted the position only there, but then I just had to follow the same steps to put on the one I removed It was easy!
1,353.71 PHP (3,520 JPY)
Delivery Information
Temporarily out of stock.
Arrival date at our warehouse: around 7 and a half months
FITMENT
-
CB1300 SF
03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)
-
MONKEY
84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
-
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
-
HORNET250
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
See all
HONDA
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
TW200E
00- (Disc Brake Car) *Processing of switch hole is required
-
TW200E
-99 (drum brakes)
See all
YAMAHA
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
-
GSR400
-12 *Ask to drill switch holes|* Normal side caps can be used.
-
GRASS TRACKER Big Boy
09-12 FI models)*Processing of switch hole is required|*Normal side cap can be used.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
See all
SUZUKI
-
W800
*Need to drill a switch hole
-
W400
*Required Switch Hole Drilled
-
250TR
-06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
-
ZEPHYR1100
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
See all
KAWASAKI
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 80mm
Full width: 730mm
Effective width of holder installation part: 130mm
Pullback size: 110mm
Insertion angle: 21 degrees
Forward leaning angle: 85 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
- APE50
- APE50
- MONKEY
- MONKEY
- APE100
- FTR223
- FTR223
- VTR250 (MC33)
- VTR250 (MC33)
- HORNET250 (CB250F)
- CB400SS
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SB (Super Bol D'or)
- NC700S
- CB750
- CB1300SF (Super Four)
- CB1300SB (Super Bol D'or, CB1300S)
- CB1300SB (Super Bol D'or, CB1300S)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Jan 26, 2020
Close to OEM and easy to handle
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Mar 10, 2022
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the grip goes, and not making it an easy to remove sticker meant I took about 20 minutes soaking and rubbing the area to remove it.Also the standard bars have a location hole for the left and right switch cluster to stop them rotating. These bars do not so you either drill a hole and hope to get it in the correct position, or remove the locating pin from the switch cluster.
View Detail
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Mar 3, 2022
I replaced Handlebar to immeChain.
The height of the handlebar is now much lower.
It's so much easier to ride.
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Feb 23, 2021
这个车把比原厂的车把窄了不少，另外，原厂的那个车把真得好重，这个则要轻很多。然后这个车把他不像原厂的车把有往回弯的那样，所以整个骑行的姿势会往前稍稍前倾一些，而原来的姿势是直直的坐着，相比较而言我还是更喜欢这个姿势，腰部会更舒服一些。车把短了有一些别的问题，national cycle的这个挡风适配不如原来的车把好了。----------------------------------------------The handlebar is narrower than a lot of the original handlebar, in addition, that the original handlebar really well heavy, this will have a lot of light. Then the handlebar He does not have that back the original handlebar bend, the entire riding posture will move forward slightly forward for some, but the original posture is sitting straight, comparatively speaking I prefer this position, the waist will be more comfortable. There are some other short handlebar problems, national cycle of the wind adapted better to the original handlebar good.Powered by Google Translator
View DetailFits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Jun 1, 2019
Качественный, красивый руль. Установил его вместо оригинального. Очень удобный для меня по сравнению с оригинальным. Удобнее посадка, легче и комфортней управлять байком. Минусы немного шире оригинала, тяжелее. Очень понравился руль. Рекомендую.Quality, beautiful steering wheel. Installed it instead of the original. Very convenient for me compared to the original. Comfortable fit, easier and more comfortable to drive a bike. Cons a little wider than the original, heavier. Loved the steering wheel. Recommend.translated by Google Translator
View DetailNew Custom Articles
